[updated:LAST EDITED ON 06-Jan-02 AT 11:12 PM (EST)]hey guys
sorry to sound so ignorant but i have not been able to bleed the brakes on my '69 f100. can anyone help me get thru this?
a brief history, i decided to upgrade the brakes i had cannibilized from a F250SD, this included discs up front. i took the pressure differential and the metering valve from the old truck and installed them along with new hard lines and everything went smoothly until the bleeding fiasco. as much as i pump the brakes i do not get any fluid coming out the right rear but it does seem to blow out the cover of the master cylinder. i thought this would be a simple procedure
but now i am stumped and so i defer to the pros...,whats up?
i just realized that i am in the wrong place and i can't #*!+$in get out. sorry!