351w

bigbib87 · #1 (**permalink**) 10-07-2009, 10:27 PM

i have a 94 f-250 i have to do a motor swap. it is a 351w with fuel injected.

what i want to know can and how do i eliminated the smog pump?

what connectors do not need to plugged in?

Mustang6147 · #2 (**permalink**) 10-07-2009, 11:18 PM

I dont think there is any plugs to worry about. A dummy pulley is put in its place, and you can run the same belt.

Kemicalburns · #3 (**permalink**) 10-27-2009, 01:43 PM

you will need plugs for the back of the heads where the tubing from the smog pump runs to. you will also need special resistors for the TAB/TAD solenoids which can be found at Ford Fuel Injection

Conanski · #4 (**permalink**) 10-27-2009, 10:05 PM

Do a search on the '87-96 forum, this topic has been up numerous times recently.