My truck has a C6 transmission from an 85 bronco. My speedo didn't work so i bought the cable it needs to run from the transmission to the cluster (i'm guessing its the cluster). On my truck, from what i can tell, there's no speedo attached and so what i was wondering is where on the transmission (tailpiece) is the cable supposed the attach? Anybody with knowledge about C6's, i'd really appreciate your help.
This beast has hacked and mod'd so brutally (before i got it). My know my parking brake cable had been straight up cut off i suspect the same happened to my speedo cable.

 

Should be on drivers side of tranny near front of tailshaft.

 

If the transmission is out of a Bronco, I assume your truck is 4x4, correct?

 

yes sir, it is.

 

Then the speedo cable will connect near the rear of the transfer case, on the driver's side of the vehicle.

 

ok thanks, but will it still be long enough to reach behind my instrument cluster?

 

Only you can answer that.

 

thanks again. i'll check it out in the morning. i'll keep ya posted too.