I have looked through the galleries here and see most do not show interior pictures or not enough of the door jam to answer my question.

I have started to redo a 71 and I like the looks of the factory two tone paint jobs. (Mine is one solid color).

Can someone direct me to some pictures showing how the two tone is split up in regards to the door jams? I see in most pictures the inside of the doors and the door jams are the same color, so where on the doors do they split to the opposite color? Only on the outer door skin?

I hope my request wasn't to confusing.

 

The inside of the doors, the door jambs, and the interior paint always matched the color of the hood and upper doors.

The paint was only split on the outside of the doors, in the middle of the bump.

To do it factory-correct, you'll need the molding that wraps around the back of the cab below the rear window, if yours doesn't already have it.

 

These mouldings have been reproduced and are available from FTE sponsor carolina-classics.com. Shown on page 72 in their catalog.