Converstion from automatic to stick

NashT · #1 (**permalink**) 06-06-2009, 03:20 AM

Hey guys, Ive converted auto to standard before, but never on a ford truck.
So here's the specs:
1995 F150, 2WD, Short Bed, 302 engine

I need to know if anyone has done this with a late 90's F150, because Im not sure if there's a difference in the auto drive shaft, and manual drive shaft.

This is what I think I need for the swap:

Manual Tranny
Clutch Pedal assembly
Manual brake pedal assembly
Clutch Master Cylinder
(Possible) Manual Drive Shaft?

Please let me know what problems/ little quarks you ran into while doing this conversion, and if the drive shafts are different.

Thanks guys,
NashT

Lead Head · #2 (**permalink**) 06-07-2009, 11:05 AM

You might also need a manual computer. The automatic transmission computer might throw a fit, and make your O/D or CEL light stay lit. If you don't care about the lights, the stock computer should work alright.