Converting 2wd C-6auto to a 4wd slushbox

Reply Subscribe

Thread Tools

Search this Thread

07-25-2002, 03:28 AM

rebocardo

Post Fiend

Thread Starter

Join Date: Jun 2002

Location: Atlanta GA

Posts: 13,873

Likes: 0

Received 0 Likes on 0 Posts

Converting 2wd C-6auto to a 4wd slushbox

Reply Like

07-28-2002, 09:08 AM

wildjon300ci

Posting Guru

Join Date: Jun 2001

Location: Conyers

Posts: 1,208

Likes: 0

Received 0 Likes on 0 Posts

Converting 2wd C-6auto to a 4wd slushbox

Well, my tranny is toast in my truck, but I have a 2wd C-6 in a 1978 E-150 that is good. Is there any way to conver the 2wd to work for a 4wd? Is it just a change in the tail housings.

Thanks ya'll

Reply Like

07-28-2002, 09:39 AM

kennethl6

Senior User

Join Date: Oct 2001

Location: Central Virginia

Posts: 258

Likes: 0

Received 1 Like on 1 Post

Converting 2wd C-6auto to a 4wd slushbox

The output shaft from a 4x4 C6 will have to be installed in the 2WD C6. That means a complete disassembly to get to the snap ring holding the shaft to the output shaft hub.

Reply Like

07-29-2002, 08:01 AM

Steve_Uzi

Laughing Gas

Join Date: Mar 2000

Location: USA

Posts: 1,191

Likes: 3

Received 0 Likes on 0 Posts

Converting 2wd C-6auto to a 4wd slushbox

I had this done... when I swapped my 460 into my 1984 Bronco.. I just brought my 1969 T-bird 2wd C-6 and the 351W C-6 down to my shop... I needed a rebuild anyway so I had it done!

I also had the AOD 1st/2nd gearset installed into the C-6. The thing pulls nicely, well there is a 460 under the hood