You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Ford-Trucks Forums community today!
I have a 292 cu.in.Y block out of a 1959 F100 that I would like to go to a good home.The numbers for this engine are C2AE 6015 C which works out to be a the V8 used in 1962 cars 62-64 trucks.
I bought the truck for parts last summer and drove onto and off the trailor we moved it with and to the store and back a couple times. It ran well. It has a 2-barrel Holley with manual choke, bell housing, flywheel and clutch, generator w/regulator and front engine mount. I already have another engine rebuilt and mounted for this project but I needed a good bed and misc frame brackets so I bought this truck for parts. It's here in Seattle on a pallet where I work so if you are close and want it send me a PM and we will make a time.
Life is not a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in sideways, thoroughly used, totally worn out and loudly proclaiming... HELL YEAH!!! What a ride!
According to Les Schwab my Brake Proportioning Valve on my 79 F-150 2WD has gone bad and I need another ASAP. They are having a hard time finding one. Anybody have one or know a place I can go to get one local??
1979 F150 Explorer 2WD Factory 460 Lowered 3" in Front & 4" in Rear
I have a driverside Ford ranger side view mirror for sale. It came off of my (Now gone) 96 Ranger. It is a good replacement for someone that may have busted the glass, needs replacement mirror glass, or just needs one cause theirs was busted off.
It's used and is missing a little of the edge trim, I am asking $5 for it. If I have to ship it I am going to have to ask for $8 to ship it. I can most likely meet up if it isn't too far. I live in Silverdale.
Here are some pics.
I just need to get rid of the extra stuff I have around.
__________________ Committee:a group of the unwilling, picked from the unfit, to do the unnecessary.
"Brutus" 1978 F-150 SC 4x4 BB460
" There is a very fine line between "hobby" and "mental illness."
" -Dave Barry, Nationally Syndicated Columnist
I want a Dana 44 solid axle out of a '77-'79 F150 or Bronco (with coild springs). I want to try to get it as complete as I can hub-to-hub, caliper-to-caliper, radius arms blah blah blah. PM me if you've got one. Preferably eastern washington, as I'm in La Grande right now and it'd be a looooong drive otherwise.
2005 F350 4X4 King Ranch CC, LB, Leveling kit, 35" Toyo M/Ts, 4" turbo back, AFE intake, Blue Spring......so far
1987 F150 4X4 Reg Cab LB, 351W EFI, ZF-5, 4.10s, 5.5" Lift with Deaver Prerunner Springs, 35" Firestone Destination M/Ts, Ford 9" Rear, Dana 44 SAS in progress
Canopy from my 1985 ford f250 diesel, regular bed. Comes with all functional glass intact and good condition. It is missing the access door and has a small outer crack (doesnt leak as its superficial) on the roof but its nice and cheap $100 on the Eastside of Seattle... its brown
Hey all, I am unemployed and need some money fast so the "Old One" is up for sale.
It has sat for about 6 months and needs an alternator to run(alternator has a bad rectifier and is chrome plated). It has a 390 2bbl, C6 auto, new front springs and round gauge panel from a 77 medium duty Ford. Has a Dana 60 rear w/3.73 gears and limited slip. Also has 16 in. rims(I got rid of the 16.5 in. ones) and a 16.5 in. spare.
$300 or best offer. Please don't beat me up too bad on the price we really need the money.
Also can throw in an Edlebrock intake for it.
I am offering it on FTE for the next two days then it goes on craigslist if it doesn't go.
1992 Ranger STX Supercab 4.0L A4LD Manual hubs, manual Xfer case
Served to honor, honored to serve
74 F250 XLT camper special, the ring and pinon are chiped and need replaced the rear is currently off the truck. 500obo it was taken off the road in Dec. ran then still starts but havent actually driven for a month.
in snoqualmie I can get details via PM if you are serious.
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.