never can get pictures to show but in my pictures i have a running board with the tip molded in

 

i got some crazt idea's floating about in my twisted mind for mine . new ones are just way too much , and i want metal for those , and mine are rotted in the center and the mounting " bars " on the underside . i'll kick myself for this as someone will do it now 'fore i get a chance but ...... the outside edge is good . cut out the center , by some rectangle stock and make new supports , proll roun the perimeter too for strength , and go to the local yards and find me some newer , 4 to be exact , ford tailgates . cut the centers out with the logo and put 'em in the middle . goofy i know , but when you are walking about in a daze most of the time the mind is out there !!!!!!!!!!!!

 

here's a couple pics of mine I used rectangle tubing

the tips are from a corvette I made the rings around the tips

 

sweet running boards keith! the last bend where your tips come out of (length of running board) does it taper off (wider in the back than the front??) or is it just the picture thats doing that?

 

Do a search in the user CP and you can find their pages that way the pages are in alphabetical order.

 

yes they are tapered 3" tall at the back 1" up front

 

Here's what I did, brightwork (cab skirt and running boards) were aluminum strips from Lowes that I cut\polished in my shop, exhaust tips are Roush 3" polished aluminum.
Ed

 

......no ...seriously...those are sweet...everybody did an awesome

job on their boards! I'm still tryin' to "rehab" a set of original boards I

picked up locally...I guess I'm just...well...thats just me bein' me......

...When I get my boards cleaned-up and the rust holes filled-in and lookin'

good-n-straight...then I can start workin' on carvin' out the NASCAR-style

exaust......I was hopin' to make use some of some of these goodies when

I get the air suspension figured out & slammed to the pavement......

https://www.drgas.net/catalog.php?catid=3

https://www.drgas.net/catalog.php?catid=1

...I figured it would save me a bunch of headaches......

...oh...the boards are commin' along slowly...very, slowly...

 

......no ...seriously...those are sweet...everybody did an awesome

job on their boards! I'm still tryin' to "rehab" a set of original boards I

picked up locally...I guess I'm just...well...thats just me bein' me......

...When I get my boards cleaned-up and the rust holes filled-in and lookin'

good-n-straight...then I can start workin' on carvin' out the NASCAR-style

exaust......I was hopin' to make use some of some of these goodies when

I get the air suspension figured out & slammed to the pavement......

https://www.drgas.net/catalog.php?catid=3

https://www.drgas.net/catalog.php?catid=1

...I figured it would save me a bunch of headaches......

...oh...the boards are commin' along slowly...very, slowly...

 

I've got a set of these tips. I think they would work well exiting through the running board.

I guess I'm still searching for a distinctive style for the exhaust tip and how it will exit the board.

Thanks to everyone for contributing to this post. I've enjoyed looking through these galleries. Everyone did a great job!!

I wish we had a directory of the admitted darksiders on this site so that searching for information on custom touches would be easier. I haven't had a lot of luck doing searches.

Andrew