We bought the following: (that i'm aware of so far)
1987 Mack tandem axle roll-off truck w/tarp clean for age
1988 International single axle dump truck with plow frame up front and air/electric/hydraulic to the rear. Hydraulic for the sander. Richards hydraulic cover. EXTREMELY clean interior.
A screen/drum assembly arrangement for our trommel screen
A few attachments for the skidsteer and loaders.
And last, but not least. The best one yet! *Drumroll please*
A 1995 DT466 powered International. But wait that's not the best part! It was originally owned by Pine Bush Equipment. It has an 18' service body with a 130 CFM compressor and a 5,000lb telescopic crane mounted on the body. Pretty rust-free for a New England truck. Pull drawers in the compartments. One compartment set up for an oxy-acetylene torch. The ULTIMATE RHN rig.
It comes complete with manuals for everything on it and I've seen everything on it work. Previous owner was a friend of dad's.
What does everyone think a truck like that is worth? Compartments are all empty.
I was listening to the other Disturbed songs on that other page while I was cruising the threads, and came back to this one and had the same song I was listening too......
hey y'all today I saw an 03 6oh 2wd auto dually for less than $5000.
__________________
Jacob
Resident farmboy, King of tractors, tractorpuller and workaholic
PAA Member #63
89 F-250 XLT Lariat reg cab long bed 4X4 351 ZF5 4in lift 33in BFG ATs on 16.5 in aluminum rims
212000 miles looks immaculate other than it's missing the bed.
__________________
Jacob
Resident farmboy, King of tractors, tractorpuller and workaholic
PAA Member #63
89 F-250 XLT Lariat reg cab long bed 4X4 351 ZF5 4in lift 33in BFG ATs on 16.5 in aluminum rims
hey y'all today I saw an 03 6oh 2wd auto dually for less than $5000.
That ain't a bad price Jake, but it is an 03 and a 6.blow, two things against it right there.
I've seen a few 99-02 7.3's around here in the sub 5k range, anywhere from a reg cab 2wd to a cc 4x4. I've also seen a few for under 3K.
Are you looking for one Jake? If you are, I'll send the links your way for the one's I find.
I don't think I could bring myself to buy a 6.0, maybe a 6.4, but that is a different animal.
__________________
Mike
-------------------------------------------------
2001 F350 CC LB 7.3 with a few mods
Wisconsin Chapter Leader JOIN HERE 7.3 Roadside Help Network
That ain't a bad price Jake, but it is an 03 and a 6.blow, two things against it right there.
I've seen a few 99-02 7.3's around here in the sub 5k range, anywhere from a reg cab 2wd to a cc 4x4. I've also seen a few for under 3K.
Are you looking for one Jake? If you are, I'll send the links your way for the one's I find.
I don't think I could bring myself to buy a 6.0, maybe a 6.4, but that is a different animal.
I got a truck lined up. I was surprised when I saw the truck and the price.
__________________
Jacob
Resident farmboy, King of tractors, tractorpuller and workaholic
PAA Member #63
89 F-250 XLT Lariat reg cab long bed 4X4 351 ZF5 4in lift 33in BFG ATs on 16.5 in aluminum rims
We bought the following: (that i'm aware of so far)
1987 Mack tandem axle roll-off truck w/tarp clean for age
1988 International single axle dump truck with plow frame up front and air/electric/hydraulic to the rear. Hydraulic for the sander. Richards hydraulic cover. EXTREMELY clean interior.
A screen/drum assembly arrangement for our trommel screen
A few attachments for the skidsteer and loaders.
And last, but not least. The best one yet! *Drumroll please*
A 1995 DT466 powered International. But wait that's not the best part! It was originally owned by Pine Bush Equipment. It has an 18' service body with a 130 CFM compressor and a 5,000lb telescopic crane mounted on the body. Pretty rust-free for a New England truck. Pull drawers in the compartments. One compartment set up for an oxy-acetylene torch. The ULTIMATE RHN rig.
It comes complete with manuals for everything on it and I've seen everything on it work. Previous owner was a friend of dad's.
What does everyone think a truck like that is worth? Compartments are all empty.
We bought the following: (that i'm aware of so far)
1987 Mack tandem axle roll-off truck w/tarp clean for age
1988 International single axle dump truck with plow frame up front and air/electric/hydraulic to the rear. Hydraulic for the sander. Richards hydraulic cover. EXTREMELY clean interior.
A screen/drum assembly arrangement for our trommel screen
A few attachments for the skidsteer and loaders.
And last, but not least. The best one yet! *Drumroll please*
A 1995 DT466 powered International. But wait that's not the best part! It was originally owned by Pine Bush Equipment. It has an 18' service body with a 130 CFM compressor and a 5,000lb telescopic crane mounted on the body. Pretty rust-free for a New England truck. Pull drawers in the compartments. One compartment set up for an oxy-acetylene torch. The ULTIMATE RHN rig.
It comes complete with manuals for everything on it and I've seen everything on it work. Previous owner was a friend of dad's.
What does everyone think a truck like that is worth? Compartments are all empty.
Get some pics of that up Pete!
__________________
Nick PAA#9
08 F-450 K R 6.4 SPARTINIZED, DPF/CAT GONE, RR Boots
04 X 6.0, 08 towing mirrors, 15k hitch, Firestone air bags
01 X 7.3, TN BB turbo, Dp tuner, ITP RR, RR up pipes, 4 Dipricol gauges,MBRP 4inch, 6637,650 dash with 2 auto meeter gauges, RR boots,
95 F-250 7.3, 6637
We bought the following: (that i'm aware of so far)
1987 Mack tandem axle roll-off truck w/tarp clean for age
1988 International single axle dump truck with plow frame up front and air/electric/hydraulic to the rear. Hydraulic for the sander. Richards hydraulic cover. EXTREMELY clean interior.
A screen/drum assembly arrangement for our trommel screen
A few attachments for the skidsteer and loaders.
And last, but not least. The best one yet! *Drumroll please*
A 1995 DT466 powered International. But wait that's not the best part! It was originally owned by Pine Bush Equipment. It has an 18' service body with a 130 CFM compressor and a 5,000lb telescopic crane mounted on the body. Pretty rust-free for a New England truck. Pull drawers in the compartments. One compartment set up for an oxy-acetylene torch. The ULTIMATE RHN rig.
It comes complete with manuals for everything on it and I've seen everything on it work. Previous owner was a friend of dad's.
What does everyone think a truck like that is worth? Compartments are all empty.
I don't know, I'd guess it's worth what you paid for it.
__________________
Mike
-------------------------------------------------
2001 F350 CC LB 7.3 with a few mods
Wisconsin Chapter Leader JOIN HERE 7.3 Roadside Help Network
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
JK
