First and Foremost, Welcome to FTE. You have a keeper, I like the flareside pickup, use mine as my workhorse and daily driver. You have come to the right forum where there are many knowledgeable members willing to assist when they can. Again, welcome to the Family of Ford Truck Enthusiast, don't hesitate asking questions when you can, and post pic's when you can.
__________________
'problem with engaging in useless activity is never knowing when your done'
Welcome to the Family of Ford Truck Enthusiast. Also have the 'styleside' has the 390ci which I affectionately referred to as my 'gas hog'. Love the lwb, find it really comes in handy particularly if in contruction, or remodeling. Again, welcome to FTE and don't hesitate asking questions and posting pic's when you can.
__________________
'problem with engaging in useless activity is never knowing when your done'
I'm not sure who is reproducing them, but I've seen them.
Last June, several days before the Western Nationals Truck Show was held in Yorba Linda CA (Orange County), Don (camperspecial65) and I went to The Truck Stop in Orange CA.
They have the stainless caps there.
truckandcarshop.com / Catalog, page 114 / # 61-25013 / $105.00 set of four.
Think the SS dog dish caps are being made by Vintique. I got them from the Truck Stop but the boxes said Vintique.
__________________
64 Ford F100 Styleside Short Bed /223 "6" & 4 speed "Little Red"
63 Ford F100 Unibody Styleside Longbed w/292 V-8, 3 deuces, dual exhausts & 3 speed "Big Red"
63 Ford F250 Flareside Long Bed w/292 V-8, two barrel, dual exhausts & 4 speed "Big Un"
63 F100 "Stageway" Crew Cab Long (wrong) bed. 292 V-8 & 3 speed
Man, there are some nice trucks in this thread. I'm still looking for a set of F250 hubcaps for a split rim.
INNIE style.
The five wheels and rings I bought a few months ago were painted (black wheels, dull silver rings) Also installed new tubes and put them on the truck...looks good...will post pic asap.
TH1567
Take a road trip, enjoy it...the Ford's ready.
I'm still looking for a set of F250 hubcaps for a split rim. INNIE style.
C1TZ1130B or C3TZ1130C .. "Innie" Hubcap -10 1/2" O/A Diameter / Argent with red FORD block Letters / 1961/65 F250.
DENNIS CARPENTER OBSOLETE PARTS in Concord NC has ONE C1TZ1130B: 704-786-8139.
No Ford Dealer or other obsolete parts vendor has any.
----------------------------------------------------- C6TZ1130F .. "Innie" Hubcap / 10 1/2" O/A Diameter / Argent with red FORD Block Letters / 1966/67 F250.
PLEASANTVILLE FORD in Pleasantville NY has ONE.
ED BENNETT FORD PARTS in Lebanon PA has ONE: 717-272-8762.
HAVEN FORD SALES in Haven KS has ONE: 800-748-7803.
GREEN SALES COMPANY in Cincinnati OH has FOUR: 800-543-4959.
No other Ford Dealer, or other obsolete parts vendor has any.
__________________ Bill / Retired Ford Partsman (1962/97) / SoCal Chapter Member.
Part Number Research: Trucks: 1928/2000 // Cars: 1928/79.
Bill: Just curious as to the difference between the "B & C" and the "F". Would the "F" also fit my 63 F250 with 16" "innie" wheels or is it somehow different?
__________________
64 Ford F100 Styleside Short Bed /223 "6" & 4 speed "Little Red"
63 Ford F100 Unibody Styleside Longbed w/292 V-8, 3 deuces, dual exhausts & 3 speed "Big Red"
63 Ford F250 Flareside Long Bed w/292 V-8, two barrel, dual exhausts & 4 speed "Big Un"
63 F100 "Stageway" Crew Cab Long (wrong) bed. 292 V-8 & 3 speed
Bill: Just curious as to the difference between the "B & C" and the "F". Would the "F" also fit my 63 F250 with 16" "innie" wheels or is it somehow different?
According to the parts catalog, these are all "Type 1" for F250's.
Type 1 is what some peeps refer to as the "bottlecap" style, with 12 scallops around the edge.
These are the same style as the F100 painted and SS hubcaps, but the F100 hubcaps are 9 1/2" O/A diameter.
Why does Ford list three different part numbers for the same style of F250 hubcap?
I haven't a clue.....or maybe I do...
The parts catalog doesn't say, but I know that some F250's DID NOT come with rear hubcaps prior to at least 1966.
The protruding hub of the Dana 60 may not allow an "innie" hubcap to be snapped on over it.
Whether any of these three F250 innie hubcaps are deep enough to clear the Dana 60 hub, I also do not know. It could be that the 1966/67 type will work on the rear.
You oughtta call Green Sales and ask them to measure how deep C6TZ1130F is.
__________________ Bill / Retired Ford Partsman (1962/97) / SoCal Chapter Member.
Part Number Research: Trucks: 1928/2000 // Cars: 1928/79.
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
You have a keeper, I like the flareside pickup, use mine as my workhorse and daily driver. You have come to the right forum where there are many knowledgeable members willing to assist when they can. Again, welcome to the Family of Ford Truck Enthusiast, don't hesitate asking questions when you can, and post pic's when you can.
