Found some good info. shackle flip, straight axle swap & more
#1
Found some good info. shackle flip, straight axle swap & more
I've been using this forum for a few years now and I think I found
some answers to a few questions that seem to get asked alot here.
This page I came across has some verry good info. on Lifts, tire size,
shackle flip, straight axle swap, axle strength, and other things that have
been asked here on this forum.
This page is for Bronco's but everything I've seen could be applied to
F-Series Trucks.
I hope this help's a few members of this forum as much as this forum has
helped me over the last few year's
Go to Bronco Lift Page
If this page has been posted before it might be worth mentioning again.
Thanks for all the help,
martin8459
some answers to a few questions that seem to get asked alot here.
This page I came across has some verry good info. on Lifts, tire size,
shackle flip, straight axle swap, axle strength, and other things that have
been asked here on this forum.
This page is for Bronco's but everything I've seen could be applied to
F-Series Trucks.
I hope this help's a few members of this forum as much as this forum has
helped me over the last few year's
Go to Bronco Lift Page
If this page has been posted before it might be worth mentioning again.
Thanks for all the help,
martin8459
#3
#5
Thanks, lots of good info there, I'm planning on doing a shackle reverse on the front of a 83f250, which I put a 87 high pinion dana60 in place of the stock TTB. I bought the shackle reverse kit from O.R.U.. Anybody have any advice on what to keep a eye out for while doing this shackle reverse? or tips? any advice would be very helpful....Anyway grate info and thanks.
Thread
Thread Starter
Forum
Replies
Last Post
bigzirb
1978 - 1996 Big Bronco
4
09-06-2016 09:09 PM
amorgan93
1973 - 1979 F-100 & Larger F-Series Trucks
18
04-26-2012 06:57 PM
JB_85F150
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
4
10-14-2009 08:32 PM