another step along the way
#1
another step along the way
well, I finally got the pulley mess sorted out (gosh these serpentine belts require a lot of tension) and we took her for a 2 mile around the block test drive.. nice.. the power brakes work good (need to adjust the prop valve) and the air bag rear was ok..
need to get the volare front end adjusted and aligned now.
the roads at the new house were tarred and rock covered this last spring, and so there is a bunch of loose stone still (ugh!)..
now to get back working on the bed wood retainers, so I can start working on the wood finish itself, and the windows & door latch pulls..
still haven't found any gauges to replace the poorly made Hanelines.
Sam
need to get the volare front end adjusted and aligned now.
the roads at the new house were tarred and rock covered this last spring, and so there is a bunch of loose stone still (ugh!)..
now to get back working on the bed wood retainers, so I can start working on the wood finish itself, and the windows & door latch pulls..
still haven't found any gauges to replace the poorly made Hanelines.
Sam
#3
Thread
Thread Starter
Forum
Replies
Last Post
sdetweil
1948 - 1956 F1, F100 & Larger F-Series Trucks
60
09-04-2016 01:43 PM
Jacksoncummins79
1973 - 1979 F-100 & Larger F-Series Trucks
1
01-25-2015 04:18 PM
kehinnc
Other; Brakes, Electrical, Hitches, Weight Distribution & CDL Discussion
6
07-23-2012 10:27 AM