Can anyone let me know where to find a copy of this series of articles by Doc Frohmader,that was in Street Rodder Magazine ,and ran from Feb.-Dec. 1999?I was told it may have been re-run in another truck magazine as well.I would like to get the whole series complete,not buy individual copies,as I'm having a motor built and want to get the info quickly.I 've seen it referred to occasionally here and at the other site.Can anyone help me out?Thanks,Steve.

 

Steve

Hi. You may want to check this out:

Go to: Webrodder.com - Hot Rod Tech Articles & Forum

Go to: Browse all tech articles

Click on: Engines(165articles)

Go toage 31 starts on bottom Page 32 & 33 all about Y block

Some of the info here is for hot rodding a y block
and does not pertain to a stock build. So, regardless of your rebuild
be careful.

Gary

 

Thanks,Gary,I'll start reading those articles tonight.I still really want to get hold of that particular series,as well,since I've seen it recommended in various forums.Tim McMaster,from Visalia,who built Charlie Burn's Bonneville record-holding '57 F100 is doing one for me,and I want to check it out.Again,thanks.Steve.

 

Steve, I got your message today and No I dont have the articles. I have seen them, but never bought any of them.

Sorry I cant be of more help,
Kevin Bigwin

 

Steve---Hope you found another oil pan!! I will look through my rod magazines and see if I have it also.
Bill-----------the article you mentioned--is street rodder--right?

 

Many thanks to the Ohio clan.Kevin,since you weren't able to help me out,I'll let you make it up to me by sending one of your spare sets of rams horns.Delusionally yours,Steve.

 

Kevin,please don't let anyone slop in the electrical on your shop.When I come back to see the family,we'll make a proper job of it.Resist the urge to go cheap,Ebeneezer!

 

Steve,

4speed just bought a set of rams for $100.00 at a yard we went to a few weeks back. He RAN to the truck, running over me and 2many56's (LOL) so he could say "their mine!"

Last time I take him with us!

I'm scared to invite you over now once I get the electric run. I know what perfection is like! Just in different areas than your expert line of work.

Kevin Bigwin

 

Yes,Kevin,I did hear of that ram's horn catastrophe.Tragic....Sounds like 4Speed should at least try to smooth things over w/2many56's.He would be in a world of hurt here in sue-crazy California.
Bill,if you want to,I could check in on your trucks while you're gone South for the winter-you know,put out some food/water and empty the litter box,take em out for an occasional walk.I'll need those keys to the shop.Steve.

 

Steve
You can watch over the herd if you want....and do some wiring for me at the same time. I am not as particular as Bigwin and as long as the lights come on and the compressor fires up.....job well done!! LOL
Bill