I found a 1967 fairlane GT and I was wanting to run the numbers on the VIN to see exactally what all it had from the factory. It has a built to the hills 390 in it with a manual tranny and I was just curious to see if that all was half way origional. So if anybody knows where I can run the VIN #s through to see the info on it i would appreciate it. Thanks for the help!!

 

Send a PM to Numberdummy. You will be able to find out alot if not all the info through him.

 

Post or email me the VIN and all the codes off the Warranty Plate.

I need the codes off the Warranty Plate, because...

The VIN does not include the BODY / COLOR / TRIM (Upholstery) / DATE (of production) / DSO (where vehicle was ordered from) / AXLE / TRANS, codes.

The Warranty Plate is located on the left door face below the latch.

Example of a 1967 Fairlane VIN: 7K42S123456: 7 = 1967 / K = Kansas City Assembly Plant / 42 = 500 GT 2 dr HT / S = 390 4V / 123456 = Numerical Sequence of Assembly.

 

7K42S194330
63D M 8A O5D 54 D1

There, I hope that I got it right. THANK YOU!!!!

 

wow, i cant believe that you had half of the info already...thats pretty cool!!

 

I want to see pics of this car Anthony!! And, yes, Bill is REALLY good finding info!!!

 

It's quite simple, really.

You are in NE, and cars/trucks sold new there were assembled in KC.

You also said it's a GT with a 390 engine. I figured it was prolly a GT HT, as very few convertibles were made.

I also have the production figures.

1967 Fairlane GT HT: 18,670

1967 Fairlane GT Convertible: 2,117.

I'll decode the info within a few minutes.

 

7 = 1967

K = Kansas City Assembly Plant

42 = 500 XL GT 2 Door HT

S = 390 4V

194330 = Numerical Sequence of Assembly

63D = Fairlane 500XL GT 2 Door HT

M = Wimbledon White

8A = Charcoal Black Crinkle Vinyl & Charcoal Black Rosette Pattern Vinyl

05D = Assembled May 5th, 1967

54 = Omaha NE Ford District Sales (Zone) Office, where the original selling dealer ordered the car from.

D1 = You have two codes as one.

D = Ford 9" / 3.25-1 / Limited Slip

1 = You sure this is a 1?

1 = Ford 3 Speed Manual all Syncromesh Transmission.

5 is a toploader 4 speed.

btw: If this had been a 1967 F100/350, I coulda decoded all the info in less than 3 minutes, as I have most of the codes memorized. Cars take longer, cuz I have to look everything up.

 

wow...thanks!! thats awesome!!! Yeah i am sure it is a 1. I will have pics as soon as I get my cash rounded up because it is in BFE!! I HOPEFULLY will have it within 3 weeks depending when I get concrete in my shop. I am really excited about it and cant wait to get it home. The seats are in OK shape black bucket seats and it has traction bars in the trunk and I gess the motor is a FRESH bored 60 over 390. Thanks NUMBERDUMMY!

 

That sounds like a really cool car. I have always liked the Fairlanes and Galaxies even though I have never owned one. And yes, Bill is great at having the info that normally you can't get and then some.

 

Hey Pat, I got the fairlane paid for!! Now Im just waiting for the concrete to get done in my shop so I can bring her on home!! Thats going to be a very good day when all of that happens.

 

Do we all need to start chanting Pics! Pics! Pics!

 

Good point Darin....

 

ok, here we go, just got it home and these pics are really bad. You will have to wait until tomorrow for better ones (I hope their better)