my mill
#1
my mill
the other day i got pretty ambitious and cracked open one of my motors (I got 3), the orginal 50,000 miler in my truck and then 2 i bought off a guy for $60 for both, but he didnt know anything about them. I took a closer look at one of them once i got them home and noticed a rebuilders tag underneath about a 1/4" of crud. Anyhoo, i took that one apart and found its bored over 0.040" and the bearings are 0.010" and no word of a lie i dont think there is more than 100 miles on the rebuild. Everything was clean internally, i didnt even really have to ream the cylinders to take out the pistons. Best of all, No visible cracks anywhere! as soon as i get the valves out its off for magnafluxing but i got a feeling that this is the future home of all my hop up stuff. Im so excited.
#3
well spread the good luck around dainit !!!!!! i had that happen when i had all the y-blocks sitting around . bought a 292 from a wrecked early sixties one ton . jasper rebuild tag on it . cleaned it up then popped the heads off and intake { aluminum 4 bbl } and what a beauty ..... bored , the po had put a nice cam in it , etc. sold it to a freind who has let it sit now i'd geuss 6 years now .
Thread
Thread Starter
Forum
Replies
Last Post
BLADE35
6.0L Power Stroke Diesel
16
09-26-2015 08:26 PM
OldFordFun
1961 - 1966 F-100 & Larger F-Series Trucks
16
09-23-2014 10:03 PM
KJNDIVER
1999 - 2003 7.3L Power Stroke Diesel
29
07-30-2014 07:23 PM