locked out of my 250
#1
#3
I could be wrong, but from what I read, you can buy new door lock cylinders and have a locksmith "set" the pins to match your current ignition key.
I need a new ignition lock and driver's side door lock. Since nobody offers all three in a package, I found that later model '95s have cylinders that can be "keyed" to an existing key. Look #43 in the pic below and read note "D":
I need a new ignition lock and driver's side door lock. Since nobody offers all three in a package, I found that later model '95s have cylinders that can be "keyed" to an existing key. Look #43 in the pic below and read note "D":
#4
#5
thanks for the replies. let me give a bit more info, i'm not locked out literally. the truck is a 92 f250 non power locks. the driver side lock sticks bad, and the ignition switch wont lock. i was trying to find a set of all 3 so i could use the same key for all. has anyone found them sold like that? if not i will just replace them separate.
#7
If you cant buy a set of three locks all keyed alike-buy them separate and take the three to a locksmith and have him key all three alike.
Trending Topics
#8
#9
Last edited by skaterbro; 11-26-2008 at 03:41 PM. Reason: link didn't work first time