You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I've got a complete set of moulding that came off of a 1966 f250 custom cab camper special. The moulding is near perfect. I have the emblems, both sides and hood. A complete set up. I believe it is a long bed. If interested contact me
__________________
Staying low for now
64 lowered longbed
Robert
What parts for the 63-4 molding set are you after...and which body/bed type is your truck...there were THREE different moldings for bedside depending on unibody or not, 64 styleside with the 64-6 type 2wd bed and one for the 57 up bed used thru 64 on 2 and 4wd trucks as well as 65-6 4WD trucks...I do have a few pieces though...
I have a 64 swb custom cab I have the hood pieces I need from the cab to the bed.
Email me some pics if you have any. tuefelhunden88@aol.com
Thanks, Art
gangstakr - I am interested in your 1966 f250 mouldings. I believe they will fit my 1965 F100, if they are for the long bed. Email me at thomsen@techie.com
gangstakr - I am interested in your 1966 f250 mouldings. I believe they will fit my 1965 F100, if they are for the long bed. Email me at thomsen@techie.com
Thanks,
Alan
1965/66's use the same mouldings.
All Camper Specials had 8' beds.
__________________
Bill // Retired Ford Parts Manager // SoCal Chapter member // Part Number Research: 1928/2001 FoMoCo vehicles.
gangstakr - I am interested in your 1966 f250 mouldings. I believe they will fit my 1965 F100, if they are for the long bed. Email me at thomsen@techie.com
Thanks,
Alan
Check your e-mail.
__________________
Staying low for now
64 lowered longbed
Robert
I have been excited to put the side trim from my 65 CS on my 66 4x4 until I read this thread. Now I find out the bedside moldings are too long for the old 57-63 style box. I guess I will have to shorten them nicely at the forward end, for I doubt I'd ever find the right ones in good shape.
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
I guess I will have to shorten them nicely at the forward end, for I doubt I'd ever find the right ones in good shape. 
