Need stock crankshaft pulley

Tims47tonner · #1 (**permalink**) 10-15-2008, 06:20 PM

Hello...I'm looking for a stock crankshaft pulley for a 1945 Flathead V8. The motor is an industrial motor that ran a sawmill. I'm putting it into my '46 1/2 ton pickup but it needs a pulley. What is on there now is the steel inner pulley to run the water pumps and generator but the outer cast iron pulley is a smaller one that ran a generator mounted to the industrial motor frame. It doesn't extend out enough to line up with the fan. Were they two crankshaft pulleys or is it all one piece (two flanges). Advice would be very appreciated. Tim

41inWV · #2 (**permalink**) 10-16-2008, 06:30 PM

Call joblot automotive in New York.

JobLot Automotive

I got a double sheave crank pully from them, runs about 80 bucks I think.

Tims47tonner · #3 (**permalink**) 11-14-2008, 04:29 PM

I'd be interested in the crankshaft pulley. How much would you charge with shipping to Monticello, Maine? 04760

41inWV · #4 (**permalink**) 11-14-2008, 04:42 PM

Tim

Click on this link:

JobLot Automotive

I think it will run around 80 bucks or so.