Hey all.
I have an '88 f150 302/aod. It is beginning do develop a bottom knock. I have a 351w that has less than 20k on it that I will be swapping in. I know of everything needed to do the swap, but the pcm. Will the 351 run with the 302 pcm? I would like to avoid the expense of converting to maf, being I already need to purchase upper and lower intake, fuel rail, exhaust, etc...

TIA
Jamie.

 

Find yourself a computer from a truck with a 351 and manual trans or non computer controled tranny, C6 or AOD. Probably best to find one near 1988.

 

FordFuelInjection.com has listings of PCMs by vehicle / engine / trans. Look there, compare to what you already have. I also don't think you should have to convert to MAF, and the intakes should work too iirc.