Where are the really good swap meets in and around Ohio and when are they? Also, which meets specialize in what?

Later...

 

Canfield has pretty good ones. Not sure, but I think the last one was just recently(think there are two during the summer).
There is the All Ford swap meets in Columbus every turkeyday weekend and then again about the first of April. It's not quite what it used to be 20 yrs ago, but sometimes you can find a good bargin.

 

I don't remember the exact dates, but there is always a couple HUGE FORD only swap meets at the Ohio State Fairgrounds every year.

I believe one of the dates is Thanksgiving weekend every year.

Here's a flyer for this year's event.

http://www.unitedfordowners.com/Flye...Swap_Flyer.pdf

 

Thamks for the reply Man... I plan on going.

Later Man...

 

Dave--also in Canfield is the Nov sale at TP TOOLS--and is near fairgrounds but has a great amount of sandblast/paint/tooling that goes on sale and I buy alot from them. Not--too far from Parsons place!!! Bill

 

Up until a few years ago I used to go to the spring and fall swap meet at the Lowes motor speedway in Charolete NC. What was great about this meet was Dennis Carpenter has his NOS part sale the same weekend and its just a mile up the road. About 400 miles one way for me. Now with young kids I cant seem to get away like before.

If its 53-56 parts you need, the supernats in knoxville is the place to go. Its there or can be bought

Kevin Bigwin

 

What are the dates for the NC swap meet?

 

Hemmings Motor News lists 100's of swap meets nationwide every month.

hemmings.com / events.

There's another mag called Auto Swap Meet that has all the info anyone could want.

 

The Charolete meets were first weekend in april and I think first weekend in October.

Kevin Bigwin

 

Thanks Bill

 

Also another guy to buy parts from,Dave--is Lyle Daniels in Ky. He is high -but his parts are real nice. I was at his place a few weeks ago and it would be a short drive for you,and he has cabs and alot of sheetmetal . He always attends Knoxville Supernat's.
Tip sale is coming around Thanksgiving. Look up their site if you need any of that stuff.
Dennis Carpenter has a great shop and have been there also. I fixed a press for them once. Bill

 

There's a fellow named Dave who works for Green Sales (800-543-4959), but he also sells his own obsolete parts, specializing in 1953/56 truck parts.

Dave Cooper: 513-403-9427. He's located in the Cincinnati area.

You missed him, Bill...he was at the F100 Supernats in Knoxville TN last May, drives a tricked out '54 Panel.

He had at least 20 tables loaded with parts, all NOS Ford.

You name it, he's prolly got it.

 

Columbus ALL Ford meet is coming up Turkey weekend. Just got my reminder in the mail.

 

cruising times magazine lists them out. its a good mag i think

 

Are you anxiously awaiting the return of the buzzards???