August B/S Part 7

80351 · #1 (**permalink**) 08-29-2008, 05:56 PM

Post away people

SuperSnake · #2 (**permalink**) 08-29-2008, 05:59 PM

Ok Dave I found the way without getting lost this time.

80351 · #3 (**permalink**) 08-29-2008, 06:01 PM

Quote:

Originally Posted by SuperSnake

Ok Dave I found the way without getting lost this time.

I'm proud of ya

80351 · #4 (**permalink**) 08-29-2008, 06:02 PM

Now is the chrome pitted, pealing,
etc?

SuperSnake · #5 (**permalink**) 08-29-2008, 06:02 PM

Quote:

Originally Posted by 80351

I'm proud of ya

I may get lost tomorrow.

SuperSnake · #6 (**permalink**) 08-29-2008, 06:03 PM

Quote:

Originally Posted by 80351

Now is the chrome pitted, pealing,
etc?

Yes it is pitted but the chrome is still there the pits are rusting.

80351 · #7 (**permalink**) 08-29-2008, 06:04 PM

Quote:

Originally Posted by SuperSnake

I may get lost tomorrow.

No you won't,
If its not pitted or anything just sand it like
you would anything else.

80351 · #8 (**permalink**) 08-29-2008, 06:05 PM

Quote:

Originally Posted by SuperSnake

Yes it is pitted but the chrome is still there the pits are rusting.

Again just prep it like you would anything else.

SuperSnake · #9 (**permalink**) 08-29-2008, 06:05 PM

Quote:

Originally Posted by 80351

No you won't,
If its not pitted or anything just sand it like
you would anything else.

Will that work with the pits there?

SuperSnake · #10 (**permalink**) 08-29-2008, 06:07 PM

Ok so it won't hurt to weld up the bolt holes and sand prime,then paint.

80351 · #11 (**permalink**) 08-29-2008, 06:10 PM

Quote:

Originally Posted by SuperSnake

Ok so it won't hurt to weld up the bolt holes and sand prime,then paint.

Nope, won't hurt it at all.

80351 · #12 (**permalink**) 08-29-2008, 06:13 PM

Quote:

Originally Posted by SuperSnake

Ok so it won't hurt to weld up the bolt holes and sand prime,then paint.

How you going to mount it if you weld up the holes

SuperSnake · #13 (**permalink**) 08-29-2008, 06:14 PM

Cool I will add that to my plans for my truck. Now all I have to do figure out some taillights that will be different.

I also been thinking about doing this to my truck.

http://www.ford-trucks.com/forums/71...o-67-f100.html

SuperSnake · #14 (**permalink**) 08-29-2008, 06:15 PM

Quote:

Originally Posted by 80351

How you going to mount it if you weld up the holes

I plan on welding the bolts inside the bumper then cutting the heads off.

80351 · #15 (**permalink**) 08-29-2008, 06:22 PM

Quote:

Originally Posted by SuperSnake

I plan on welding the bolts inside the bumper then cutting the heads off.

For that smooth look.
and I guess if you want the truck dropped that
seems like a good way to do it.
Personally, I don't like them dropped but that's me.
Raised yes, leveled OK, dropped, no use for it.