No topic thread,,, Part 2
Join Date: Dec 2003
Location: Saskatoon, Saskatchewan
Posts: 89,663
Received 1,351 Likes
on
1,110 Posts
Good afternoon
Wound up spending $100 for a release bearing and clutch alignment. The parts guy pointed out that it has a grease zerk so that I can lube it in the future, I told him that was nice as I have a 1 piece bellhousing and it has no clutch pan which is why I was also buying the alignment tool. I've always cheated and placed my clutch and disc on the front shaft and pushed the trans into the pilot bearing, then set my clutch bolts and aligned my disc by hand and tightened. No short cuts on this one.
Wound up spending $100 for a release bearing and clutch alignment. The parts guy pointed out that it has a grease zerk so that I can lube it in the future, I told him that was nice as I have a 1 piece bellhousing and it has no clutch pan which is why I was also buying the alignment tool. I've always cheated and placed my clutch and disc on the front shaft and pushed the trans into the pilot bearing, then set my clutch bolts and aligned my disc by hand and tightened. No short cuts on this one.
Join Date: Oct 2005
Location: northwestern Ontario
Posts: 262,946
Received 4,130 Likes
on
2,655 Posts
Join Date: Oct 2005
Location: northwestern Ontario
Posts: 262,946
Received 4,130 Likes
on
2,655 Posts
Join Date: Oct 2005
Location: northwestern Ontario
Posts: 262,946
Received 4,130 Likes
on
2,655 Posts
Join Date: Dec 2003
Location: Saskatoon, Saskatchewan
Posts: 89,663
Received 1,351 Likes
on
1,110 Posts
Join Date: Dec 2003
Location: Saskatoon, Saskatchewan
Posts: 89,663
Received 1,351 Likes
on
1,110 Posts