Folks - I met Miles Anderson some time ago and discovered that he was building an 86 F150 Flareside. It sounded like a nice truck, but today he brought it by and I discovered it is a very nice truck. Then he told me he wants to sell it! So, I've taken notes and pictures and have included them here. If anyone is interested, and I think some of you will be, just contact Miles at 918-530-5241.

Here are the details:

• Price: $5,500
• 1986 F150 Flareside XL
  • Cruise - works
  • Factory A/C, but the lines aren't on
  • Seat from a 94 regular cab with a fold-down console
  • Factory clock
  • Sport mirrors - new
  • New dash cover
  • Sony AM/FM/CD system
• 1987 Mustang roller 302 stroked to 331 CI
  • EFI with mass air conversion, 24# injectors and Mustang A9L ECU
  • Comp #276 roller cam & roller lifters
  • Sig Erson aluminum heads giving 10:1 CR
    • 200cc runners
    • 62cc chambers
  • Shorty headers into Mustang X-pipe, 2 1/2" exhaust & Walker Super Turbo mufflers
  • Four core radiator
• 1987 Mustang AOD tranny, 1800 RPM stall converter, & 3.90 gears
• Cragar 5-spoke Super Sports
• BF Goodrich 70's in front with 20k miles and new Cooper 255-70 Cobras in back
• Bed has a Mark-K kit in it
  • 6-slat red oak wood
  • Stainless runners
• Paint is 14 months old "Pitch Black"
• Black vinyl tonneau cover
• New items include:
  • Tail lights
  • Front bumper
  • Windshield trim
  • Bumper guards
  • Carpet
  • Back glass, which is 20% smoked, as are side glasses and vent windows
  • Ford oval on the grill
  • Tail gate chains

 

Looks very nice

 

WTB: Clutch/brake pedal assembly for 83-86 F100/350 series truck, for hydraulic clutch.

 

I am looking for a bench seat from the 80's or 90's full size f-series with the built in center console. Color does not matter. Please private message me for my number to send me pictures.
Thanks.

 

I have a couple of those

 

Looking for a running or rebuildable Y Block. Preferably a 292 or a 312.

 

I'll watch our Craigslist.

 

Going to look at a 292 for $150 after work.


No go on that ad. Still looking.

 

Good luck!

 

SOLD.



Sad and bittersweet. But my last Ford Truck is now with another family.

 

I have a Posi Lok 4X4 for a 1997 through 2003 F150 4X4, It's part # PSL750-1, or #450750, this allows you to bypass the vacuum diaphragm for positive engagement of the front axle. It also gives you 2 low, which means you can engage your transfer case into low without engaging the front axle.

 

I sold my 50 Ford F1 a couple years back and forgot i still had this car cover. It's heavy duty and in very good shape. It had minimal use before i tore my truck to pieces. It could use a good washing to get the dust off, and there is one small tear at the rear, where the drivers side top rear bed side corner caught it. I dont have a truck to put it on and just put it on my suv for pics. It's free to whomever wants to come pick it up in Owasso.


**The truck cover is no longer available. Hope you get some good use out of it, Gary.

 

Ron - Would it fit my '69 Super Bee or '50 Chevy Pickup? I'd love to cover them.

 

Hiya Gary, long time no see. I dont know about your super bee, since that car is so wide? It might fit your 50 chevy pickup? I custom ordered from California Car Cover to specifically fit a 1950 Ford F1. But yer welcome to it, if u want it.

 

I would love to have it. Can I buy you lunch? Would be good to see you again anyway.