I have a set of 5 16in stock steel wheels 5 on 5 1/2 with 3 3/8ths center hole with 235 85 R16 tires, they are from a 1966 F100 also 352 V8 with 4spd from same truck.
PM me with any questions Other parts to for 66 f100
Thanks Bill W
Look at this Big Bad Ranger waiting for paint!!!!!
Dana 44 front
13 bolt rear
C5 auto tranny
3 shock tower on each wheel
4 Barrel Holley Carb
Custom interior and upholstery
This truck will run over cars!!!!!! AND you can drive it to work or school!
CALL JR AT 480-217-2764
<a href="http://photobucket.com" target="_blank"><img src="http://i76.photobucket.com/albums/j21/woodys12578/CraigslistStuff009.jpg" border="0" alt="Photo Sharing and Video Hosting at Photobucket"></a>
I am looking for a front bumper for my 1993 F-250, perferably a double tube with a grill guard-smittybilt style, or a stock 95+ front bumper with the cut outs.
I have a few parts from a 1980 F-150 single cab long bed 4X2:tilt steering column, stock chrome front bumper, both drivelines, all been sitting in the weather for a while
I have a stock air cleaner assembly with the "soup bowl" cut out with a K&N filter, and a complete custom 3" exhaust out of a 1993 F-250 extended cab 4X4 with a 7.3L n.a. motor, it's was cut in front of the muffler for removal, the rest is welded
I have a plain jane ford 302, .030 over with the rebuild. rebuild was 1991, IIRC, and truck had approx 15-20k miles on it when I pulled the motor out for a rebuild of the truck. Would like have it go to a "good home" here in phoenix area. Ran very strong while I used it as a daily driver. Somebody make me an offer and take it off my hands. I would like to clean up the shop.
PM me here and I'll send you my phone number. Steve
302 - 2bbl
being rebuilt as we speak
I am travelling to So Cal with a small group from Southern Ontario next week.
A friend of mine can bring in all the trim and other (I mean ID) to change a truck over from a Ford to a Mercury except for tailgate.
The "M" Series Trucks were built in Canada to fill a need in the Dealer Distribution Network here in Canada. Except for a few engine differences in the early years - [1947-54], they are essentially Badge Engineered Ford "F" Series Trucks.
He can do any year from 61 to 67.
If you are interested, contact me by private post B4 Saturday as we leave Sunday.
hey guys i just picked up a 1977 f-150 ranger xlt and have decided to part out my 76 f-100 supercab no motor or trans. has good glass and doors some good chrome it has a flat bed on it right now with a ladder rack but i do have the bed also it is listed on craigslist for free though it does have a good title and a good ford nine inch rear end with 3.00 gears. make me an offer i can deliver for a small fee also it is located in prescott valley email me or call me and leave a message at 928-710-9404 thx ray.
I'm selling a 1988 Dodge D250, with a covered utility bed, 2wd, 360, (new Holley 4175) 4sp, P/S, P/B, cold A/C converted to R134A, (new compressor) 3:54 gears, This truck has 119,000 original miles, I have replaced all hoses, belts, new radiator, back-up electric fuel pump, new dual exhaust, utility box is carpeted for camping, the cab has new carpet, side windows new tint, tires good, (2 extras). Would consider it as a part trade on either a 90s 4x4 Ranger V-6, or I'm looking for a 95-97 F250 4x4, 460, Super cab, long bed, Both prefer around 100,000 miles, NO HIGH MILERS.
Any questions feel free to PM me. I also have an 86 F250 4x4 460 C-6 that I would sell or part trade on a 95-97 F250 as I stated above. Picture in my Gallery.
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company.