Want a re-buildable 390FE. :)
2 barrel or 4 barrel doesn't matter but I will use the iron manifold.
I'm not going to hot rod it, just make a good pickup engine out of it.

Alvin in Vail AZ

 

Will be parting out a '75 F100 SuperCab 155".
Not sure what parts I'll want just yet tho. :/
But the cab, hood and bed prob'ly aren't something I'm going to want.

http://www.panix.com/~alvinj/file12/F100front.jpg
http://www.panix.com/~alvinj/file12/F100cabmount.jpg
http://www.panix.com/~alvinj/file12/F100floor.jpg
It's an AZ truck so it's rusting from the inside, under the rubber mat! LOL :)
Mine did the same on the passenger side from the A/C.
This one is from the transmission cover and/or gear shift lever hole? {shrug}
http://www.panix.com/~alvinj/file12/F100-T18.jpg

http://www.panix.com/~alvinj/file12/F100wheel.jpg
Has all four hubcaps.

http://www.panix.com/~alvinj/file12/F100Philco.jpg
See how the chrome is coming off the dash panel?
http://www.panix.com/~alvinj/file12/gearshift1.jpg
I removed mine with 0000 steel wool. ;)

Alvin in Vail AZ
ps- if there's something you want me to post a picture of, just say so. :)

 

sold!!!!!!

 

Need a FE bell C6 auto with slip type tailshaft.

Can be working or a re builder for mock up.

I need to remind my self to not give them away as i will always need one.

Garbz

Gab

 

I have a Britebox, it lets you run high beams, low beams, and fog lights at the same time, This will fit an 01-04 F250/350 truck.

$50.00

I still have two new Fumoto valves for the gas engines too. Part#106 $20.00 each

 

Britebox----------------------------------------------------Sold

Fumoto Valve----------------------------------------------Sold



I still have 1 Fumoto Valve Part#106 $20.00-----------For Sale!

 

My son and I have chaged priorities and are no longer going to finish this '68 Ford F100 project. Only work completed has been on the engine. a 390 FE 30 over. LOTS of goodies though. Too many to list here. DDs out at 335hp and 459#s torque. 9.5:1 compression ratio and nickel seats so will run on pump gas. C6 A/T with trans brake and hi pro internals. Need to sell as a whole or part out. Thanks

 

I'm not to sure about posting this for the local Az. guys & gals, but I will put it up and if its not all good then feel free to delete it.

I just did an AFE air filter and I now have two WIX 6637 filters NEW, IN THE BOX still sealed and I have no use for them any more. I picked up both air filters about two weeks ago, and while doing some oter upgrades I went with a cleanable AFE filter.

If you are local Arizona and in need of one or both of them shoot me a PM and and I will hook you up for what I paid for them on my account. I would like to avoid taking them back because they were special order since none were in stock.

Shoot me a PM

 

SOLD.
Thanks Guys

 

Hey all...due to back problems I am retiring from auto repair. I am having a yard sale Nov 14th and movng Nov 20th.

I have a 2 shelf poly cart from Mac, a bunch of mechanics tools ( I am keeping a basic set and selling the rest because of finances) I will have a complete list of tools later today. I plan to get a fair price for them or they will not be sold!


I would like to get about 50% of list price, but will consider reasonable offers.


I would be happy to let anyone from FTE come by friday Nov 13th for first dibbs!



I also have a very nice Matco 6 series toolbox and $2300 worth of tools that will be repo'd next week...I owe $6000 on them...the work center was $7000 alone, another $3000 for the work center hutch.

56 inches wide, 6' tall and 30 inches deep.

it looks like the picture except the 8 inch wheels are black




includes:
BB70850K universal master cyl bleeding kit $85.10
EE1 engine ear $142.90
GW85021 21 mm xl ratcheting combo wrench $25.95
GW85022 22 mm xl ratcheting combo wrench $25.95
GW85024 24 mm xl ratcheting combo wrench $27.95
MCL21M2 21 mm long combo wrench $42.50
PFC43300 pneumatic fan clutch set $204.50
SAIPM126 12 pc mid lenght socket set $133.20
676TD 76 pc Tap and die set $236.95
SRFM66TA 6 pc MT Flare NUT wrench set $204.15
MT2112 3/8 in composite impact wrench (pistol) $312.95
TRC250A 1/2 in torque wrench $271.80
SGW9902 16 pc metric gear wrench set $255.95
FX85988 12 pc xl Box Gear wrench set $189.95

everything but the impact gun is in very good shape.
-------------------------------------------------------------------------
13 PC. HOLESAW KIT
Most popular Hole saws used in automotive applications
For general purpose hole cutting applications
Comes complete with nine (9) hole saws (3/4", 7/8", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", and 2-1/2"), and all the necessary accessories including an adapter, pilot drill, small mandrel and quick-change mandrel
Part#: HSV13K Price: $194.25


------------------------------------------------------

9 PC ROLL PIN PUNCH SET
Expanded set of Roll Pin Punches
Punches center onto pin to eliminate damage to pin or hole wall
Drives pin through hole without sticking, jamming or binding
Set includes 1/16, 5/64, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, and 5/16 roll pin punches
[set details]


Part#: SPRP9T Price: $118.20

-------------------------------------


GEARED SERPENTINE BLT 15 PC
Same coverage as the KD3414, but with the convenience of "GearWrench" Technology
Ratcheting gearwrench with slim head allows for speedy access even in the most compact areas of todays smaller engines.
Ultimate set to service a wide range of vehicles with spring-loaded tensioner pulley.
Easy access with both crows foot and socket sizes



Part#: MSBT15 Price: $113.35



----------------------------------------------------------------


Snapon

Set, Awl and Hook, Instinct Handle, 4 pcs.
Stock#: SGASA104BR
List $73.95 old style handles
------------------------------------------------------------------
CENTRAL PNEUMATIC 3/8dr Butterfly Impact Rattle Gun
--------------------------------------------------------------

Ingersoll Rand 2115Ti 3/8" Drive Air Impact Wrench busted anvil $25
---------------------------------------------------------------------
Schley Products 64900 Universal GM, Chrysler, Mitsubishi Harmonic Damper Pulley Puller Part # SP64900




Features: • This low profile puller has been designed for use on the following automobiles, SUV's, vans and pickups:
• Chrysler 1990 & later vans with 3.3L V-6
• Chrysler 1993-1997 autos with 3.3L & 3.5L V-6
• Chrysler 1994 & later vans with 3.8L V-6
• Chrysler 1994 & later pickups with 8.0L V-10
• Chrysler 1995 & later auto's with 2.0L 4 Cyl, 2.4L 4 Cyl & 2.5L V-6
• Chrysler 1998 & later automobiles with 2.7L DOHC V-6, 3.2L SOHC V-6 & 3.5L SOHC V-6
• Chrysler 1998 and later 4.7L V-8
• Mitsubishi Eclipse 1995-1999 2.0L DOHC non-turbo
• G.M. 1997 & later Gen III 5.7L V-8, which includes Camaro, Corvette, Firebird and Trans-AM
• 2000 and later Gen III trucks & SUV's with 4.8L V-8, 5.3L V-8, 6.0L V-8 and 8.1L V-8
• Cadillac Escalade with the 6.0L V-8
• Cadillac 1988-1992 4.5L V-8
• Cadillac 1991-1995 4.9L V-8
• Cadillac 1993 & later 4.6L V-8
• Oldsmobile 1995 & later 4.0L V-8


------------------------------------------------------------------------


Click to enlarge
LS41900 - Pitman Arm Puller
RRP:
Price:$31.95
SKU:LS41900
Vendor:
Brand:Lisle



----------------------------------------------------

Torque Wrench, Electronic, TECHWRENCH, Flex Ratchet, 5 to 100 ft. lbs., 3/8" drive

Item Qty Price**
Torque Wrench, Electronic, TECHWRENCH, Flex Ratchet, 5 to 100 ft. lbs., 3/8" drive
Stock#: TECH2FR100

$359.00 Add To Cart

Checkout



Description:

TECHWRENCH® FEATURES
Accuracy (Ratchet Models) 2%CW, 3% CCW.
Each button has ONLY one function (power on, select unit of measure, increase fastener torque setting, decrease fastener torque setting).
All models include 3 "AA" batteries for power.
Comfortable, non-slip grip handle.
Stand on handle bottom keeps tool from rolling off flat surface.
Flex-head ratchet moves 15°.
All models have a Low Battery Indicator and Auto Shut-off (after 2 minutes idle).
Designed to withstand shocks without failure.
Splash-proof, protects against water and most automotive shop fluid.
Complies with ISO-6789-2003 and ASME B107-28-2005 Standards.
EU/CE—DE, ES, FR, IT, NL, PT, UK.
Includes storage case.



-------------------------------------------------------------------

Ratchet, Air, Compact, 1/4" Drive (5-25 ft. lb.)

Item Qty Price**
Ratchet, Air, Compact, 1/4" Drive (5-25 ft. lb.)
Stock#: FAR25A

$289.95 Add To Cart

Checkout



Description:
FAR25A Features:
• Air Motor vanes resist wear, chipping, cracking and moisture
• Needle bearing supported drive shaft provides a smooth running tool
• Replaceable air inlet bushing prevents cross threading of air inlet on handle
• Ergonomic handle provides a sure grip and reduces fatigue
• Variable speed trigger is spring loaded padded style
• Directional Muffler directs exhaust away from the user
• Low dBa rating reduces fatigue from noise

 

double post

 

Gear wrench set flex head 8mm-25 mm 16 pcs List: $275

gearwrench set stubby metric 8mm-19mm list: $104.90

May60000 mayhew pick set List: $52.64

ingersoll rand 3/8s titanium pistol broken anvil $25

(2) IM5100 snapon 1/2 impact gun $25 each

IR 3/8 air ratchet list: $203.46 works good $65

dominator 48 inch prybar List $111.43

cornwell 1/2 in drive 14 pc impact sockets deep 10-22mm 24mm list: $288.45

cornwell 1/2 in drive 15 pc impact sockets shallow 10-22mm 24mm 27mm list:$199.43

Mac steering wheel puller kit SWP700m List: $164.99

Mac tools 7 pc chisel set List:155.99

gm engine rolling tool $10

gm brake sping tool for 1 pc spring $10

gm brake spring tool for 1 pc spring (trucks) $20

bt8300 Mac tools battery tester List: $229.99 will take $50

Lisle 1/2" impact driver with 5 bits List $32.95

Ok...thats a good part of what I have for sale...if I can't get a reasonable offer on these items I will take them with me when I move!!

 

For Sale : 4 almost new { NO dings, scratches, scrapes, dents, etc. } factory alum. mag style 17" x x 7.5" wheels , complete with center caps for sale . Wheel specs : 17"x x7.5" wide, 6x135 mm lug pattern, and aprox. 5.5" B/S . They are in as new condition with only 1200 miles { near new take-offs for custom wheels } and will sell for : $200. Sorry, but unable to ship . Email questions to rcb@npgcable.com Thanks <!-- / message --> <!-- BEGIN TEMPLATE: ad_showthread_firstpost_sig --> <!-- END TEMPLATE: ad_showthread_firstpost_sig --> <!-- controls -->

 

Anyone have a radiator for a 80-86 F series / bronco w/ man trans they are looking to get rid of? I know I should just go to a yard and pull one but if I can save a trip and help someone downsize their extras pile I'd rather do that.

 

As seen on Craigslist: 1993 Ford Bronco XLT 4x4

Asking $2750 because I think it's fair. She's been my baby for 12+ years, but the real baby is coming and I need something with 4 doors. Plus, if the flying job disappears this summer, I'll need something with better gas mileage for a daily driver.