If anybody needs 67-72 parts I've got tons! Cabs, Box's, frames, hoods, you name it!

Still looking for a 300 Six for my 67 shortbed.............

 

wanna trade a '47 for a 300 and a 390 w/c6 and 53,000 miles?

 

im interested in getting a full framed ford torino. late 60's early 70's

 

Mikey, the late 60's Torino was a unibody, not full framed.

 

well, shucks i would like a full frame car

 

You may need to look at a Galaxie for full frame cars.

 

I need to start liquidating some of my "treasures". Anybody that needs 65-66, and 67-72 pickup parts shoot me a PM. I have extra beds, cabs, chassis's etc, etc. Literally TONS of this stuff.

 

Don, if that '47 is still cluttering up your place I can bring up my car carrier and still have room for 2 swb trucks on the deck or any parts (up to 12,000 lbs. plus a '47) that need to be delivered between Condon and Christmas Valley was that suttle enough?

 

Co-worker just picked up a 1960 F-250 Custom Cab, with big back window. It has a six cylinder and 4 speed. The person he got it from did a hack job 4x4 conversion, by cutting the box shorter, and lopping off the end of the frame (yuck). No transfer case or front drive shaft. A lot of tlc needed. He wasn't sure what he wanted to do, but he didn't want to pass it up. So, I'm listing it for him. $1000 o.b.o. Pictures will come soon, if anyone wants them. I did manage to jump the coil, and get it started, and it actually runs quite well. Will try and tinker with it through out the week so that it will move under its own power. It has a clear Oregon title.

 

Looking for a good 428 fe complete engine. prefer running but would consider a rebuildable engine.
pm me with details.

 

anyone got a 69 to 73 f-250 4x4 with a 390 and 4speed trany im looking for one to restore

 

still looking for a good 428 fe.
might settle for a strong 390, if it has mods thats better.
also need hp d44 4.10, and a np205 t case and shift linkages.
also have 1971 f250 2 wheel drive chassis if anybody is interested.

 

Is there anyone in the Klamath Falls area that has a wiring schematic for '97 F series trucks they'd be willing to loan me for a few days?

 

I may be able to email you what you need. It depends on what part of the wiring harness your looking for. What area are you looking for?

 

Specifically, the ignition wiring from the ignition switch to where ever it goes out to...