i have a Xenon-Vision HID kit. its from japan. fits any bulb thats a 9005. the lights are 5,000k. $100 obo

text my cell for details. 714-318-1485

 

so my dad is trading in his bronco with the cash for clunkers program as early as friday, it has a brand new set of tires, BGF all terrain TA KO 31 X 10.5 on stock wheels, the ones with 10 round holes crome, its a 96 eddie bower edition, he is willing to trade wheels and tires with someone for free if they need new tires just doesnt want them to go to waste. PM me and i will give you his number.

these are the rims but it has new tires now.

 

All my stuff is still for sale too. I not have it all off and cleaned up

 

hey guys, i was wondering if anybody has the means to re-calibrate my speedo and ODO for the 35 inch tires i have on my truck right now. the dealer cant do it because they can only re-calibrate to a size of tire that was originally on the truck, at least that is what they told me when i took it to my local dealer to get fixed. So im am hoping that someone somewhere has a scanner or something that they can re-calibrate my gauges with? i can pay you in money beer sex whatever will get the job done. I would really like to have accurate gauges again! please let me know if you can help

thanks guys/girls

 

Check with S W Speedo 800 833 4669

 

greetings all, i own an E350 built in '95. heavy on the mods so a bunch of misc parts leftover. i have a pair of Velvet Ride shackles for E/F-350's - originally installed on my '95 E350 - they are in perfect shape. also have a K&N filter for 460 F350 - filter only. i have a pair of van front seats and one 3 person bench (free no charge), a pair of Ford 460 exhaust manifolds in good shape, a handmade two gauge pod pillar in grey (probably need respray), brass rad 4 row in good shape, 7 blade fan (pulls tons of air) with fan clutch, and tons of misc.

i also have an rear airbag setup for towing so they are essentially helper springs. i believe the kits is #57125 from Air Lift. i have a light duty compressor that has been mod'ed for increased air circulation around the motor assembly. i also have two dash gauges set up in a ford mustang dash pod, a ton of fittings and hose as well as a number of Parker valves so that you can fill both sides evenly at the same time and then drain down either side selectively to get ride height even. i have two low pressure switches so that if one side starts leaking, the pump will fill just that side. also the system is designed with front and rear air for tires as well as inflatable toys. i can provide a schematic for all this to function any way you want as well as toss in the required relays. the bags have been installed but i only have ~2k miles on them. the rest is Brand New, never installed. i ended up having my spring guy build me a set of rear springs to accommodate towing my boat so the back already rides a skosh high. even set to 10psi, with the bags in, it just sits too high and has more chop than i like.

there is also a very cool boneyard out in lakeside - Hwy 67. trucks, vans, SUV's. they let you wander and prices are way cool. happy to grab something for u if i am heading that way. i live in north san diego co.

neil
i am running 20" wheels, 2x200A alternators, headers, excursion rad, multiple electric fans, custom exhaust, a UMP airfilter w/ custom plumbing, V10 throttle body, fully modified wiring harness/mod'ed instrument cluster, oil/tranny coolers mounted under the body near the rear wheel cooled via thermostatically controlled fans, a couple of $k in Earl's hose and fittings (man that stuff adds up quick :-)), limited slip, disc brake conversion to the D60, tranny by Jim @ ATO. still to go - 16" front brakes and convert the 13" disc brake rears to 14".

 

Well guys i have to sell one of my trucks and it was a hard call but i want to see her go to a good home the Low Down took 3rd place in grey wolf's picture contest last year hope one of you guys can pic her up and finish it off it's a great truck I'm Asking $4000.00 obo paint is 14 months old she belongs in so cal as you can see it's set up so cal style as i'm from san diego times are rough right now hate to sell the truck but i built this one and i can do it again for sure the interior needs to be done she runs good here is a link to my gallery to see the progress of the truck to the condition it is in today https://www.ford-trucks.com/user_gal...formstate=main any intrest please feel free to give me a call 916-531-3854 or message me my name is Earl W.

 

This is a project for people with money, plain and simple.

1964 Lincoln Continental convertible, suicide doors, 430ci engine

$10,000 runs and drives.

The interior was completely redone. Seats, carpet, dash, door panels, convertible top, etc. The engine was gone through, runs perfect once started. The gas tank was redone, the braking system was completely overhauled. The only thing needed to get this thing back on the road and into shows, is some body work (rust and paint), new windshield, glass for little window on passenger door, new tires, lots of polishing metal parts, new taillights, and some gas. I have the original hubcaps in excellent condition. We've spent over $20,000 to get the car where it is now because we were going to keep it, but the person who it was intended for passed away 3 years ago. I know you never get back what you put in a project, so id just like to sell it how it sits now.

 

1997-2003 F-150
Hey guys I have to get rid of these parts. If your interested in anything E-mail me at Racerx6466@hotmail.com. Make me an offer

Passenger Front Fender $50
Drivers door with glass (power) $100 obo,
Passenger door with glass (power) Sold
Suicide back door passenger door (no glass) $100 obo,
Quarter pop out window drivers side $40 obo
6 1/2 ft (standard) Bed, no tailgate or lights- straight inside and out $150 obo
8.8 rear axle Sold
24 gallon gas tank with sending unit $50
Spare tire cable winch $25

 

Lowering the price on the F-100 to $3200.00 you all know i will take $3000.00 for lol but that is as low as i can go trying to move and it has to go know what i mean. can't haul five cars & trucks to Utah Just got offered a job at a big company need to take it there is no work for my trade here in CA right now.


see above post for photos of the truck thanks

 

WANTED!! some 8 lug stock steeles for my 1978 f250 2wd crew cab. Can anyone help a brother out? i am wanting to swap out my grill for a 73 thru 77,so if anyone has those parts laying around let me know.

I have some parts off my grill if some one needs them, let me know
I live in so-cal

 

Saw several sets of stock 8 lug wheels at the salvage yard today. Just gotta get you out to get some. Lots of them out there.

I also have several 73 to 77 grille shells along with headlights and buckets. Also have the small pieces that fit just above the shell and the radiator support.
I will swap part for part if your 78/9 grille sheel is in clean condition. I am looking for clean straight shells and rectangular headlight buckets.

I too am in So Ca. (Pomona)

 

Seats and sway bar for Econoline:

https://www.ford-trucks.com/classifi.../ppuser/188524

 

Moving soon and time to pass on some items. Free to good home:

1 set of grill inserts (round headlights). No cracks, just 30 years old
---Should fit 73-75.

1 set of vent window assemblies. New glass. Sandblasted and black powdercoated. Missing the rubber seals. Long stupid story on these... https://www.ford-trucks.com/forums/8...strations.html
---Will fit just about any 73-79. The vent window handles are non locking (i.e. 73-77ish)

PM me if you are interested.

 

Got my edge evolution for sell. for 08 f250 6.4. Got rid of the truck dont need the programmer.