Archived SoCal & Hi Buy/Sell/Trade Ads
#46
Help me lower my truck...
by buying this stuff!!
4 Eagle Alloy Wheels & chrome lug nuts $160
Black, 5 on 135mm (97-03 F150)
Minor Scratches and 1 is missing Valve stem
Mud Terrain Tires, 2 315/75R16 (35inch) - $140
Both have approximately 50-60% tread left
*****PLEASE READ GUIDLINES FOR POSTING ADS*****
4 Eagle Alloy Wheels & chrome lug nuts $160
Black, 5 on 135mm (97-03 F150)
Minor Scratches and 1 is missing Valve stem
Mud Terrain Tires, 2 315/75R16 (35inch) - $140
Both have approximately 50-60% tread left
*****PLEASE READ GUIDLINES FOR POSTING ADS*****
#49
Wanted: Air tank
any air tank, air lines, valves, conectors, a smaller tank would be better (able to mount under bed of Ford Truck). Able to hold some where aound 100 to 200 PSI.
Planing on making an on bored air system for airing up tires, air horn, light air tool use.
Cheers
Planing on making an on bored air system for airing up tires, air horn, light air tool use.
Cheers
#53
1969 F100. 302 with a 4 speed, excellent tires (new, but not brand new). Wood lifts right off bed. Brand new alternator. I have an ad posted here, Ford-Truck Enthusiasts Classifieds - 1969 F100 - Powered by PhotoPost Classifieds
$1,500, i really need the money. If you want this truck, dont be scared to PM an offer! Located in Norwalk, CA.
$1,500, i really need the money. If you want this truck, dont be scared to PM an offer! Located in Norwalk, CA.
#55
Hi everyone-
Looking for parts and what not for my 57 F100- (see pix in gallery) if anyone has odds and ends and cool - good condition parts for sale, let me know!
Thanks!
alana@funhousepresents.com
Looking for parts and what not for my 57 F100- (see pix in gallery) if anyone has odds and ends and cool - good condition parts for sale, let me know!
Thanks!
alana@funhousepresents.com
#56
FS: 1987 Ford Bronco. 150k on the chassis. $4000 for the whole bronco as it sits right now with the stuff listed below.. It's a great rig, but loss of job forces the sale/part out. Currently Non-op'ed but does pass smog. Just have to put the cats back on it.. We took them off for more power and don't drive it on the street.
However I may be parting it out.. (If someone buys the suspension then the whole truck will be torn down and I'll sell the little things off of it as well.) Here is what I'm asking for the big parts.
8" Skyjacker Suspension lift $1k (new this is worth over $2,700.This lift will fit any 80-96 bronco or F150. Included in the lift is the following.
Front lift parts
8" front coils
drop pitman arm
4 shocks for the front
TTB drop brackets
Radius arm drop brackets
Extended radius arms. Provides better caster so the truck will drive straighter (new model. Purchased last year)
Front Sway bar brackets.
Front steel braided brake lines.
Dual steering stabilizer setup.
Rear lift parts
Full spring pack. NO blocks
2 rear shocks.
Rear steel braided brake line
1996 351w Mass air motor Headgaskets have been replaced, heads were machined, and a new waterpump and belt tensioner installed. Less then 500 miles on the motor since the headgasket job. $800 (local yards are selling them for 1,200)
1978 C6 Transmission total rebuilt with a Jr. Shift kit installed. Rebuilt and installed by Riverside transmission. $800 (the tranny shop charges $1700 + for this.
1987 transfer case Shifter comes in the middle of the floor in front of the radio. Not on the side by the drivers foot. $300
39.5 x 18 x 15 Supper Swamper Boggers. Mounted on 15x12 on 5x5.5 wheels. Will fit any 5 lug ford from 79 - 96 All tires have atleast 50% tread. one has 75% tread and one is almost new with over 90% tread. $900
I will have other parts as well, but will not begin stripping the small stuff off until one of the big items above are listed. (I don't want to be stuck with a bronco missing a bunch of little parts I'd rather sell big stuff first, pull the little stuff off and junk the frame.
Here's a pic. Obviously it's got a lot of dust/dirt on it due to it sitting the back yard. But you get the idea..
email me. spectre_xpd8@yahoo.com
However I may be parting it out.. (If someone buys the suspension then the whole truck will be torn down and I'll sell the little things off of it as well.) Here is what I'm asking for the big parts.
8" Skyjacker Suspension lift $1k (new this is worth over $2,700.This lift will fit any 80-96 bronco or F150. Included in the lift is the following.
Front lift parts
8" front coils
drop pitman arm
4 shocks for the front
TTB drop brackets
Radius arm drop brackets
Extended radius arms. Provides better caster so the truck will drive straighter (new model. Purchased last year)
Front Sway bar brackets.
Front steel braided brake lines.
Dual steering stabilizer setup.
Rear lift parts
Full spring pack. NO blocks
2 rear shocks.
Rear steel braided brake line
1996 351w Mass air motor Headgaskets have been replaced, heads were machined, and a new waterpump and belt tensioner installed. Less then 500 miles on the motor since the headgasket job. $800 (local yards are selling them for 1,200)
1978 C6 Transmission total rebuilt with a Jr. Shift kit installed. Rebuilt and installed by Riverside transmission. $800 (the tranny shop charges $1700 + for this.
1987 transfer case Shifter comes in the middle of the floor in front of the radio. Not on the side by the drivers foot. $300
39.5 x 18 x 15 Supper Swamper Boggers. Mounted on 15x12 on 5x5.5 wheels. Will fit any 5 lug ford from 79 - 96 All tires have atleast 50% tread. one has 75% tread and one is almost new with over 90% tread. $900
I will have other parts as well, but will not begin stripping the small stuff off until one of the big items above are listed. (I don't want to be stuck with a bronco missing a bunch of little parts I'd rather sell big stuff first, pull the little stuff off and junk the frame.
Here's a pic. Obviously it's got a lot of dust/dirt on it due to it sitting the back yard. But you get the idea..
email me. spectre_xpd8@yahoo.com
#57
FS: 1987 Ford Bronco. 150k on the chassis. $4000 for the whole bronco as it sits right now with the stuff listed below.. It's a great rig, but loss of job forces the sale/part out. Currently Non-op'ed but does pass smog. Just have to put the cats back on it.. We took them off for more power and don't drive it on the street.
However I may be parting it out.. (If someone buys the suspension then the whole truck will be torn down and I'll sell the little things off of it as well.) Here is what I'm asking for the big parts.
8" Skyjacker Suspension lift $1k (new this is worth over $2,700.This lift will fit any 80-96 bronco or F150. Included in the lift is the following.
Front lift parts
8" front coils
drop pitman arm
4 shocks for the front
TTB drop brackets
Radius arm drop brackets
Extended radius arms. Provides better caster so the truck will drive straighter (new model. Purchased last year)
Front Sway bar brackets.
Front steel braided brake lines.
Dual steering stabilizer setup.
Rear lift parts
Full spring pack. NO blocks
2 rear shocks.
Rear steel braided brake line
1996 351w Mass air motor Headgaskets have been replaced, heads were machined, and a new waterpump and belt tensioner installed. Less then 500 miles on the motor since the headgasket job. $800 (local yards are selling them for 1,200)
1978 C6 Transmission total rebuilt with a Jr. Shift kit installed. Rebuilt and installed by Riverside transmission. $800 (the tranny shop charges $1700 + for this.
1987 transfer case Shifter comes in the middle of the floor in front of the radio. Not on the side by the drivers foot. $300
39.5 x 18 x 15 Supper Swamper Boggers. Mounted on 15x12 on 5x5.5 wheels. Will fit any 5 lug ford from 79 - 96 All tires have atleast 50% tread. one has 75% tread and one is almost new with over 90% tread. $900
I will have other parts as well, but will not begin stripping the small stuff off until one of the big items above are listed. (I don't want to be stuck with a bronco missing a bunch of little parts I'd rather sell big stuff first, pull the little stuff off and junk the frame.
Here's a pic. Obviously it's got a lot of dust/dirt on it due to it sitting the back yard. But you get the idea..
email me. spectre_xpd8@yahoo.com
However I may be parting it out.. (If someone buys the suspension then the whole truck will be torn down and I'll sell the little things off of it as well.) Here is what I'm asking for the big parts.
8" Skyjacker Suspension lift $1k (new this is worth over $2,700.This lift will fit any 80-96 bronco or F150. Included in the lift is the following.
Front lift parts
8" front coils
drop pitman arm
4 shocks for the front
TTB drop brackets
Radius arm drop brackets
Extended radius arms. Provides better caster so the truck will drive straighter (new model. Purchased last year)
Front Sway bar brackets.
Front steel braided brake lines.
Dual steering stabilizer setup.
Rear lift parts
Full spring pack. NO blocks
2 rear shocks.
Rear steel braided brake line
1996 351w Mass air motor Headgaskets have been replaced, heads were machined, and a new waterpump and belt tensioner installed. Less then 500 miles on the motor since the headgasket job. $800 (local yards are selling them for 1,200)
1978 C6 Transmission total rebuilt with a Jr. Shift kit installed. Rebuilt and installed by Riverside transmission. $800 (the tranny shop charges $1700 + for this.
1987 transfer case Shifter comes in the middle of the floor in front of the radio. Not on the side by the drivers foot. $300
39.5 x 18 x 15 Supper Swamper Boggers. Mounted on 15x12 on 5x5.5 wheels. Will fit any 5 lug ford from 79 - 96 All tires have atleast 50% tread. one has 75% tread and one is almost new with over 90% tread. $900
I will have other parts as well, but will not begin stripping the small stuff off until one of the big items above are listed. (I don't want to be stuck with a bronco missing a bunch of little parts I'd rather sell big stuff first, pull the little stuff off and junk the frame.
Here's a pic. Obviously it's got a lot of dust/dirt on it due to it sitting the back yard. But you get the idea..
email me. spectre_xpd8@yahoo.com
Dude that rig looks sweet.
Ed
#58
Hey guys- i just finished putting a new Jag front end in my truck. New steering column, disc brakes--its HOT--- (pix later) I am now looking for a Duel Master Cylider--- does anyone have any suggestions on a Used or referbished one or shall i get the "new one"? All i have left is - Master Cylinder, Power Pump -steering and new exhaust system. Then my baby will be up and running next month!!! The new front lowered the truck ---- perfectly!!! I am going to pull out a few leafs in the back end to have it lowered a bit!
Im SOOO excited ---- when this is done- all cosmetics---- Whoohweeee
Just checking in!
Im SOOO excited ---- when this is done- all cosmetics---- Whoohweeee
Just checking in!
#59
Hi everyone-
Looking for parts and what not for my 57 F100- (see pix in gallery) if anyone has odds and ends and cool - good condition parts for sale, let me know!
Thanks!
alana@funhousepresents.com
Looking for parts and what not for my 57 F100- (see pix in gallery) if anyone has odds and ends and cool - good condition parts for sale, let me know!
Thanks!
alana@funhousepresents.com