I have 6 center caps for the Ford/Alcoa 8 lug wheels pictured below. I have JUST THE CAPS - wheels are not for sale. These caps work on the aluminum wheels shown, which were found on HD F-250's & F-350s from 92-97. They fit on the front of these 2wd trucks only.

They were also found on & will work on the front and/or rear of E-250 & E-350 vans up to 2010.


I am asking $25 per cap for these and will sell in pairs of 2 or as a set of 4 only.






I then also have these 3 caps which are 2 4wd fronts and 1 rear. These fit Alcoa wheels (ones that look like the ford ones above - as well as other models) that do not have the machined recesses near the center bore like the Ford ones. The 2 fronts have some light rust on the chrome and the rear one has some light denting. I can get more/better pics if needed.


I am asking $30 for these 3 caps.

 

Let me know, I've got one in very good shape...this the style of hood (see photo) just not the actual hood.
Jason

 

THIS TRUCK IS NOW FOR PARTS! LET ME KNOW WHAT YOU NEED!!!

If I don't find a buyer soon I will part this truck out! Send me a part list with your offers and I will make them available for you to pick up on Jan 28 or 29 at your convenience! And whatever doesn't sell will go to the junkyard...so spread the word!

1991 Ford F350 4x4, 351 Windsor, C6 Auto Transmission, Dana 60 Kingpin Front Axle, Dana 70 Rear Axle
6 inch Pro Comp Lift
3 inch body lift
20” KMC Hammers
35” Nitto Terra Grapplers (1000 miles)
New fuel pumps
New fuel sending units
New fuel filter
New plugs
New wires
New air filter
New fluids in front and rear diff
Trans filter and fluid changed
Transfer case fluid changed
Brakes inspected, lines flushed with fresh fluid
New vacuum booster
New steering box
New steering lines
New power window motors
New speedometer cable

I really hate to get rid of this truck, my friends and family have helped me build it so it means alot to me, but I have run out of time to get it ready for a cross country trip....so I had to go buy a new truck and this one has to go! FAST! I have put a ton of work and approx $2000 in new parts into it...I have all the receipts and the parts are all lifetime warranty. I built this truck for camping out of and hunting. It is black and gray right now but I have the rest of the paint to finish making it all gray.

I would be willing to negotiate on the price so CASH TALKS, dont be afraid to make an offer. I would also be willing to sell it without the rims and tires if you prefer. I would be willing to trade for tools, some adult/kids motorcycles or atv's, and possibly hunting equipment.


Edit: SOLD!!

 

Looking for a transfer case for a 2002 Excursion (7.3L).. Internals can be in any condition. Just need the case itself.. (buddy was in an accident and the front driveshaft caused the transfercase to break)

 

My 3.0L is tired and so is the tranny. I am looking at swapping out to a 4.0L or 5.0L. I need a complete motor assembly, w/exhaust manifolds, ECM, etc, and corresponding tranny. I am looking to do this project in the next 3-4 months. All input // comments are welcome.
Gary

 

I'm looking to swap my 40/20/40 bench seat with fold down center console for a capitans chair configuration.

My seats are out of a 2002 and are "updated" by Ford from the 99s+ (small comfort changes. "Increased Bolster Size"). They are two-tone grey and dark grey. The console is also the updated console with cup holders. My seats are in good shape, non smoker.

I am looking for same year or newer seats with a center console and capitans chairs for the arm rests.

If theres any interest let me know.

 

***UPDATE***SOLD!!! ***I have a set of stock rear leaf springs off an F-350 for sale if anyone is interested. They should fit a 1999-2004 and maybe some other years. The numbers stamped on both springs are RPN 2748 and F81A BE. Each spring has one shackle still attached.

 

I'm still looking for two 16 inch OE wheels. Let me know if you can help! Thanks!!

Brian

 

What year?

 

What exactly are you looking for? I have (1) spare tire of a 2004 F-350. The tire is a LT 265/75 R16 on the factory steel spare tire rim. The tire has never been used so the tread is still 100%. Let me know if your interested, I see your in temecula, as I am in murrieta right up the road from you. Not sure if its what your looking for, but thats what I got if your interested.

 

Tires are 315/70 R17 (tire is comparible to a 35x 12.50) and still have 85% tread left.

THESE ARE NOW FORSALE! ANY ONE INTERESTED CONTACT ME.

 

Opps! Sorry bout that! I'm looking for OE 16 inch wheels for my 54 F100.

 

I've got a center jump seat/console from my 2002. PM me for info

 

I've got a couple, let me find a picture. Here it is this style. They were from the midwest so some salt damage near the bolt holes.

 

Lol, ok forget my post.