You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I'm getting ready to order fuel filters , it looks like they only have the type with the lid already on the cost is 20.72 the more we order the more we save. Anyone wants in on this that lives locally post up and let me know.
__________________
Dave
1999.5 F350 XLT,cc,drw,4X4,a pair of levers,4:10 LS
6637 mod, 4"MBRP cool duals,2 pos chip, ss hpx,ITP pre-pump with holley red pump ,140 V IDM , WW, EBPV deleted,AIH deleted, Autometer gauges
Did you order? I'm about due. I need to change the big one too, ordering any of them?
__________________
Scott
His: 01 F-250 Lariat, 7.3, ZF-6, NV271. A few mods
Hers: 06 Freestar SEL 4.2l
79 Bronco Ranger XLT.. used be the driver, now waiting to become the project.
96 Grand Marquis LS... 25 mpg commuter
This is a bit off subject, but we never made a May all topic thread so here goes..
I just finished getting the coolant filter installed... question: how do I know when the filter is plugged? will it the filter itself run cold?
When I strained what drained in the pan through a paper towel, there was quite a bit of grit in it..so lemme know when you order, i may get another 4070
also, do they have the fuel filters for the OBS trucks? they aren't listed by application
next mod: 6637 ( my filter cover from pete is on the way )
next = IDM
This is a bit off subject, but we never made a May all topic thread so here goes..
I just finished getting the coolant filter installed... question: how do I know when the filter is plugged? will it the filter itself run cold?
When I strained what drained in the pan through a paper towel, there was quite a bit of grit in it..so lemme know when you order, i may get another 4070
also, do they have the fuel filters for the OBS trucks? they aren't listed by application
next mod: 6637 ( my filter cover from pete is on the way )
next = IDM
In my experience they do not run cool when they are loaded. I changed my first one after two weeks on the recommendation of a guy that had installed one befrore me. I couldn't tell any difference other than the weight....and when it dried out I cut it apart Packed full.
I changed the second one about a month later.....after that it became an annual maintenance deal. Once all the casting sand is removed they really don't load up much at all.
Have you talked to Dave this morning? He's getting ready to order the filters.
__________________
Scott
His: 01 F-250 Lariat, 7.3, ZF-6, NV271. A few mods
Hers: 06 Freestar SEL 4.2l
79 Bronco Ranger XLT.. used be the driver, now waiting to become the project.
96 Grand Marquis LS... 25 mpg commuter
__________________
Scott
His: 01 F-250 Lariat, 7.3, ZF-6, NV271. A few mods
Hers: 06 Freestar SEL 4.2l
79 Bronco Ranger XLT.. used be the driver, now waiting to become the project.
96 Grand Marquis LS... 25 mpg commuter
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
Diesel Guy's;Getting ready to order fuel filters
Packed full. 
