cam in my bronc

82ford302 · #1 (**permalink**) 05-16-2008, 11:55 PM

ok i really need some confirmation here. the bronco i have is a 95 with mass air, and the firing order is just the standard 302 order not the 351 order. now my question is would the "cam" be a roller or flat tappet? i hear all different ideas and theories on this but i need a solid answer before i tear apart a daily driver. some say its a roller then some say its a flat tappet. i know what the difference is just wondering if it could have either or in it.

thanks,

mike

80broncoman · #2 (**permalink**) 05-17-2008, 05:10 AM

You don't have to pull the intake to find out. Just pull a valve cover and remove one rocker arm. Then pull out and measure the pushrod.
6.812 = NON-Roller Cam
6.258 = Roller Cam
This is the only 100% positive way to know for sure.

82ford302 · #3 (**permalink**) 05-17-2008, 01:00 PM

you know, i never even though of that lol. thanks for that info man