availability of original floor mats / how to remove the old one without ruining it
I'm in the process of restoring my 65 CC...I want to paint the interior of the truck. The original floor mat is in there an in good shape...however, it's very brittle and as I've tried to remove it (with another guy helping me), it seems there's no way to remove it without tearing it up. Before I remove it, are mats available like the stock one that's in there, and if not, am I better to just mask it off and skip painting the floorboard, which is not badly rusted at all.
No one makes a stock type floor mat. After market mats are close but do not have the logo.
As to removing it. warmth is the key to get it out in one piece.
GArbz
__________________
64 F100 "Christine" 472 EFI C6 and mean
63 F100 Uni Custom under construction 4" off the pavement and built to drive DOHC, EOD.
69 F250 Crew Hiboy 360 435. Driver.
05 Escape XLT
Do the aftermarkets at least have a similar pattern, and if so who has them?...even without the logo? Yesterday it was 85 degrees and the thing was still so brittle I didn't dare move it much....maybe about 8 hands could do it....two guys wasn't enough....
FWIW- if you go after market i do not recommend using LMC. sub par to say the least. i think i could have done a better job with a can of rhino liner and a brush. LOL. My 2 cents Dutch
since you say you have a CC truck...Im assuming you have a floor mat withe color on black speckled...the base trucks I believe got the ones with the gear and lightening bolt...what color and what trans is your truck and is it 2 or 4wd...
Join Our Site - Its free, quick and easy!
