I have a 2006 f150 SCREW. I just bought a Valor DTS 660w. the 660 has a reverse wire. I have a Audiovox license plate backup camera.

If I can connect the 660 to the trucks reverse wire, the 660 will switch to rear camera automatically when I put the truck in reverse.

The camera is connected to the reverse wire at the hitch harness. It comes on whenever I put the truck in reverse. W/o connecting the 660 reverse wire to the truck reverse wire, I have to do manual switching on the 660.

Does anyone know where the under the dash reverse wire is located?

Thanks.

 

I am going to run a wire from my hitch wiring (same reverse wire I used for camera), and follow the camera video feed back to the DTS 660w's brown reverse wire. It should work fine. I'll post results.

 

Worked perfectly!!!

 

Actually the reverse wire is white/green not brown. the brown wire on the 660 is mute.