1954 239 Timing Gear Install Help

Rogers Performance · #1 (**permalink**) 05-07-2008, 04:55 PM

Guys here is what i need i need a clear pic of what order the timing gear for the cam how it go,s on. This is for a 54 car OHV parts i have in front of me small spacer cam gear counter weight eccentric wash bolt.

Thanks mike

Sam_Fear · #2 (**permalink**) 05-07-2008, 08:03 PM

gear, weight, eccentric, spacer, washer, bolt.

Sam_Fear · #3 (**permalink**) 05-07-2008, 08:04 PM

Oh yeah, the dots do not line up like most timing sets. 12 pins between the dots on the drivers side.

Rogers Performance · #4 (**permalink**) 05-07-2008, 08:46 PM

Sam is there a spacer between the cam and the gear. If i put it togeather like you say the cam locks up meaning the gear gets pushed to far back and ther is no end play. also when the spacer go,s on is it flush with the end of the cam.

Mike

Sam_Fear · #5 (**permalink**) 05-08-2008, 05:43 AM

My apologies. I was referring to to the crank gear! I'm surprised no one caught it. The cam, I don't know. Again my apologies.