FI conversion

AaronW · #1 (**permalink**) 10-09-2001, 02:22 PM

I ran accross a guy selling intake throttle body, injectors, computer, and distributer from an 86 mustang 302. Should this stuff bolt right up to my 79 351W?
Thanks
Aaron

AaronW · #2 (**permalink**) 10-09-2001, 05:01 PM

Ok nevermind the first question, if I get a 351W lower manifold and distributor from and EFI truck, should this setup bolt up to my truck.
Thanks
Aaron

cbwarrior · #3 (**permalink**) 10-21-2001, 04:55 PM

I doubt the computer would be compatible for the 351, since the displacement is different. Plus you'd have to think about airflow thru the intake might be a restriction since it is designed for a smaller engine not requiring as much air.

88 F-150 4X4 XLT Lariat w/5.0 EFI 5 spd (DAILY DRIVER)
86 Ranger 2WD w/2.3L EFI 5 spd to be 351W 4bbl C4 (NEW TOY- DETAILS WHEN FINISHED)
85 Old Cutlass Supreme 350/TH350 Holley 4160,Edelbrock Performer intake, el-cheapo headers, General Kinetics 270H series cam, 15.588 best 1/4 mile with original 10 bolt 2.41 gears (OLD TOY)

Donate52 · #4 (**permalink**) 10-22-2001, 11:38 AM