Side Window weather striping

FlashBurn123 · #1 (**permalink**) 04-24-2008, 01:08 AM

Hello, I am restoring my 90 Bronco II. I have had no luck locating weatherstriping for the two curved, side windows. Any idea where I can find replacement striping for these windows?

Anyhelp would be greatly appreciated.
Thanks.

80351 · #2 (**permalink**) 04-24-2008, 11:49 PM

Quote:

Originally Posted by FlashBurn123

Hello, I am restoring my 90 Bronco II. I have had no luck locating weatherstriping for the two curved, side windows. Any idea where I can find replacement striping for these windows?

Anyhelp would be greatly appreciated.
Thanks.

If you are refering to the 2 rear side windows that is not weahter strip it is actually plastic molding. Try LMCtruck dot com they having everything you will probably need.

You can also try NPD National Parts Depot.
There are actually a lot of places.

tbolt 460 · #3 (**permalink**) 04-25-2008, 01:02 AM

anyone need the metal molding for the side windows??? off a 85 b2

HBYHRS87 · #4 (**permalink**) 04-28-2008, 01:10 AM

Hello,
Are you looking for the rubber part the window glass is mated to or weather stripping for between the glass and the truck body? Never seen replacements for the glass side but I used some of the small width rubber seal I got at Home Depot and a thin bead of glass sealant from Autozone. Worked great for me, no leaks with two winters on it now, one of those here in Alaska with -50F test!

80351 · #5 (**permalink**) 04-30-2008, 10:35 PM

Forget the little rubber seal just a bead of silicon will do it.