Ok, I just saw that too. So I'm good lol But the reason I have not put them on is because I am in Texas working and I am from S.C. Plus I am working 7 days a week right
now. I will put them on and wire them later. I am getting messed up with all the ways to do it. DOES anyone have a write up on a simple but correct way. One guy says it's simple but how do 7 wires go into 3?
Sorry but I don't have access to get you the info right now since I'm on my phone but you will have to run extra wires for the marker lights and turn signals, heat. I can probably find you the info by the time you get home to hook them up. Or maybe someone else wil be along. I hooked my heat to a separate switch and the wires for turn and markers are in the dash.
"I'm hearing voices but all they do is complain"
some of these posts dont say what year mirrors are going on what year truck, so i have a question. I have a 2000 F250 and i want to put 08 mirrors on, but besides reversing the wires for correct operation of the mirror, are there more wires that need to be run to operate turn signals on mirrors?
My 08 mirrrors purchased from Ed (FTEpartsguy) and installed on my 01 F350.
That's what I did. It wasn't my intention to make a how to thread, there's 2 or 3 of them on this site already.
Check post #5 for the link to the wiring instructions I used to install and wire the mirrors on my truck. It's been a while now since I did all the research on stalling them so I can't say for certain if your truck will be identical to mine, but I'd guess it will be.
Looks great! How much were these mirrors?? I have looked on ebay for some and boy they are about $600 to $700! Seems a little high. This is my next project long as my check book and wife dont have a say so!
I bought a pair of DEDC 08+ mirrors off of amazon. I put them on my 03 Excursion. The wires were different colors on the off brand mirror. I was forced to troubleshoot which was which. I somhow got the mirrors to work correctly without having to dig into them and flip the wires on the servos. So I know its possible from the connector. http://www.amazon.com/gp/product/B00RVFOLWK
Thanks so much for this post! I clipped my mirror on a freeway sign and with this and some LED lenses I found online, I was able to replace the broken turn signal in an hour and get a neat looking upgrade.
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Fordģ is a registered trademark of the Ford Motor Company.