FWIW: When I bent 1" copper pipe for my motorhome generator exhaust, the bender would crimp it, but I moved the bender a half inch or so every time it started to crip, so I ended up with a lot of very minor crimps, rather than one big nasty crimp.
WARNING: i highly suggest not signing up for pirate and start posting away... you will get flamed and you will get flamed hard... There is alot of good info on pirate but you have to sift throught the b.s. to get it. Be very carefull about what you post. as pirate is no where near as forgiving as fte is... I know from personal expierence...
__________________
Don
: 12 volt specialist
1995 f-250 ext. cab, lb. 4x4, 5.8 5 speed. Performance mods, and a heavy foot.
Quote:
Originally Posted by STGFordCrazy04
X2 and hes not talking about truck nuts
Quote:
Originally Posted by STGFordCrazy04
Welcome to the Minions house.....Giving correct answers since 2007.
WARNING: i highly suggest not signing up for pirate and start posting away... you will get flamed and you will get flamed hard... There is alot of good info on pirate but you have to sift throught the b.s. to get it. Be very carefull about what you post. as pirate is no where near as forgiving as fte is... I know from personal expierence...
WTF you newby faulker! Take your junk over to the newby section or better yet park your stock junk at the mall and don't come back till your on Dana 60's and at least 42's.... Or take your junk and park it in the crusher and don't come back till you have half a clue. You mean like that?
Join Our Site - Its free, quick and easy!
