__________________
Just another zombie. my rig:
09 f-150 6" body lift, TTB front,stacked rear blocks,BFG A/T, Fuzzy Dice
Ok so apparently some small minded people dont understand that the truck in this signature is a combination of many sarcasims. Please quit being stupid and study up before you run your mouth about it.
Try and tear it up. I want/plan to be able to handle some mud, and rocks just not bogs or hill climbs if that makes sense.
I cant believe Im saying this but for your application Id buy some rocks. The pumpkins on the medium stuff is too big to be useful. You might have 44s or even bigger tires but your ground clearance is the same as Rocks with 35s. Ill take some measurements tomorrow. Weve got 2 80s model F700s and 1 99 model GMC Top Kick with an Eaton rearend (the only GM product Ive ever liked. Funny thing is only the cab is similar to the GM trucks everything else is BEEF). IIRC 11.00R20s are about 42-44" tall so that would be a good comparison
__________________
Kris
Please do not PM me. My email is STGCountryboy312 at AOL dot COM
karl i wisj i had that kinda money. Anyone know where i can get good decently priced coilovers?
__________________
Just another zombie. my rig:
09 f-150 6" body lift, TTB front,stacked rear blocks,BFG A/T, Fuzzy Dice
Ok so apparently some small minded people dont understand that the truck in this signature is a combination of many sarcasims. Please quit being stupid and study up before you run your mouth about it.
oh my lady me and kris have been talkin and it may see some mud. got a possible paint scheme and whatnot in the plans so it wont feel bad if i get it dirty
__________________
Just another zombie. my rig:
09 f-150 6" body lift, TTB front,stacked rear blocks,BFG A/T, Fuzzy Dice
Ok so apparently some small minded people dont understand that the truck in this signature is a combination of many sarcasims. Please quit being stupid and study up before you run your mouth about it.
I cant believe Im saying this but for your application Id buy some rocks. The pumpkins on the medium stuff is too big to be useful. You might have 44s or even bigger tires but your ground clearance is the same as Rocks with 35s. Ill take some measurements tomorrow. Weve got 2 80s model F700s and 1 99 model GMC Top Kick with an Eaton rearend (the only GM product Ive ever liked. Funny thing is only the cab is similar to the GM trucks everything else is BEEF). IIRC 11.00R20s are about 42-44" tall so that would be a good comparison
Kris suggesting rocks, and Nicks not here to see it what a shame, BUt yeah I was thinking about finding some tires that fit the "stock" rims.
Quote:
Originally Posted by Ryan50hrl
if you only want a dot trail rig.....d60s will do that just fine....no need to go to Large Fseries stuff...
d60's even cromod probably wont hold up to the torque the dt360 is gonna put out.
Quote:
Originally Posted by crazyredneckanyhow
oh my lady me and kris have been talkin and it may see some mud. got a possible paint scheme and whatnot in the plans so it wont feel bad if i get it dirty
Karl,
can I get some pics of what you did to your stealth? I might as well clean it up while Ive got it off the motor. At a minimum port match it to the TFSs and clean up some of the casting flaws.
__________________
Kris
Please do not PM me. My email is STGCountryboy312 at AOL dot COM
Karl,
can I get some pics of what you did to your stealth? I might as well clean it up while Ive got it off the motor. At a minimum port match it to the TFSs and clean up some of the casting flaws.
Thats basically all I did. I port matched to the intake gasket, since I had already done the heads. Then I took the 6" long rod and 80 grit sanding drum and removed all of the casting flash. With the 6" rod, I was almost able to get to the entire length of each runner, all the way to the "floor" under the carb pad. I'll see of I can get some pics of it to show what I did. It's dirty, as it as a $110 ebay find!, but you can get the jist.
__________________
Karl
I'm the Voice of Reason
FTE - Where signatures get edited with no explination why.
So did everybody just over look my question about coilovers? Ive been lookin an i may want to go that route but i dont know anything about them
__________________
Just another zombie. my rig:
09 f-150 6" body lift, TTB front,stacked rear blocks,BFG A/T, Fuzzy Dice
Ok so apparently some small minded people dont understand that the truck in this signature is a combination of many sarcasims. Please quit being stupid and study up before you run your mouth about it.
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
