1940 1.5 ton vs 3/4 fenders?

[53deere]

Are the fenders from a 1940 1.5 ton the same as what was used on the 3/4 or 1 ton pickups?

Thanks.

[46fordtruck]

Yeah, same fenders, they will interchange

[53deere]

Thanks, that what I thought based on looking at pictures. How about rear fenders for a '40 1 ton pickup? What else will fit. Sorta looks like maybe even up to '47 used the same rear fender but when did they start.

[petey shoes]

53deere, have pair of stainless trim for sides of hood off 40 1.1/2 ton if interested. are you parting out 40 ford 1.5 tonner? if so, what do you have? petey shoes

[Ken Blythen]

I thought the 3/4 & 1 ton 40/41's (16" & 17" wheels) had smaller fenders than the heavy trucks ( with 20" wheels)

[46fordtruck]

The 40-41 trucks, larger than 1/2 ton, all used the same fender, listed as an 01T in Ford parts books.
As for rear fenders, if we are talking the 1 ton pickup body, then the '38-'41 all used the same if they are 1 tons. The '42 and up called for a different fender, not sure what the difference is, never had the chance to compare a '38-'41 and a '42-'47 1 ton rear fender.

[Chaosracing]

I have a 47 1 ton and the rear fenders are bigger than the 1/2 ton. Some is due to wheel size, some is also due to larger bed size.