04 Explorer 4.6 V8 which programmer

HemiEater · #1 (**permalink**) 03-31-2008, 01:40 PM

any thought on which one would be best...?

fordmdb · #2 (**permalink**) 03-31-2008, 07:42 PM

There are a few good ones out there. SCT products work very well with Ford vehicles. If you have any paticular questions feel free to ask. Also, if interested we have set up discounted pricing for FTE members on SCT products.

HemiEater · #3 (**permalink**) 03-31-2008, 07:50 PM

whats out there for my 2004 and what will it do? any dyno results?

I'm on your site looking around... Thanks

HemiEater · #4 (**permalink**) 03-31-2008, 07:58 PM

didn't find anything there for a 2004 Explorer 4.6 V8... did I not see it?

HemiEater · #5 (**permalink**) 04-01-2008, 05:18 AM

so.... where did you go..?

fordmdb · #6 (**permalink**) 04-01-2008, 07:25 AM

Hi HemiEater
As far as SCT, SCT calibrations for the explorer 4.6L are very similar to the 4.6L truck and expe's. Similar gains in power and econonmy can be expected when running with a higher octance fuel.

HemiEater · #7 (**permalink**) 04-01-2008, 04:17 PM

well I guess I'm missing something... I just need to buy one for the 4.6? it don't matter what it's for (truck, explorer) as long as it's for the 4.6... ???

I would like to get one that will turn off the traction control..

fordmdb · #8 (**permalink**) 04-01-2008, 07:50 PM

Yes sir; Absolutley, SCT products like an X3 can turn off traction control. And the drive by wire will be improved with increase throttle response and feel.

HemiEater · #9 (**permalink**) 04-01-2008, 09:02 PM

so which one should I get...sorry about all the ?'s I just want to know which tuner I need... There are many X3 tuners on your site with different part numbers... seems to me there should be an easier way to buy one... and do you have any dyno results????

fordmdb · #10 (**permalink**) 04-02-2008, 10:00 PM

Hi HemiEater
My opinion is an X3. Sorry for all the X3's on site I need to reformat that for sure, so its not so busy. Also, For a quicker response email me at mike@5startuning.com I dont have a chance to look at FTE but about 1 time a day.

thanks
Mike