Pics? of your Lifted Expedition...
#1
Pics? of your Lifted Expedition...
I have a 98 EB and the time has come to lift it. I need some pics of yours along with some specs to help me choose a lift height. Like Lift brand and size, along with tire rim size combo. back spacing etc.
I am looking for maybe 4 inches, 35 tires, and your help would be appreciated. So show off your hard earned $$$ at work!!!
here's mine without lift. Hopefully I can post a lifted pic in a couple of weeks.
I am looking for maybe 4 inches, 35 tires, and your help would be appreciated. So show off your hard earned $$$ at work!!!
here's mine without lift. Hopefully I can post a lifted pic in a couple of weeks.
#4
My old 98.3" PA body lift,2" Daystar coil spacers and torsion bars turned.Ran 35,s on a 16x10 wheel.Trimmed front valance and front inside corner of running board.
Having problems with pics.Ill get them up later.My current 98 just put 2" spring spacers and turned torsion bars.Running 305,s on 16x10,s,same areas trimmed to clear the turning
Having problems with pics.Ill get them up later.My current 98 just put 2" spring spacers and turned torsion bars.Running 305,s on 16x10,s,same areas trimmed to clear the turning
#5
Originally Posted by fiveohpoepoe
My old 98.3" PA body lift,2" Daystar coil spacers and torsion bars turned.Ran 35,s on a 16x10 wheel.Trimmed front valance and front inside corner of running board.
Having problems with pics.Ill get them up later.My current 98 just put 2" spring spacers and turned torsion bars.Running 305,s on 16x10,s,same areas trimmed to clear the turning
Having problems with pics.Ill get them up later.My current 98 just put 2" spring spacers and turned torsion bars.Running 305,s on 16x10,s,same areas trimmed to clear the turning
post them up when you can....
#7
Trending Topics
#9
#10
Originally Posted by fiveohpoepoe
18" Lightnings and no lift on 285,s.Others are 2" spring spacers with torsion bars turned.This is the way it sits now.305,s with a 16x10 wheel.
Still working on pics of my last Expy with 5" of lift with 35,s.
Still working on pics of my last Expy with 5" of lift with 35,s.
what's the offset on those 16x10's?
nice rig!!
#11
#12
Originally Posted by SPRPRBGT
what are your front and rear measurements through the center of the rim from the ground to the top of the wheel arch? i turned my bars all the way up and i dont think i have that height (minus tire size)
#13
#14
#15
The 305,s come out to just above a 33". Ill get a better explanation on the torsion bar turning.Ill also have to measure
It will raise the center of gravity obviously,but nothing extreme by far.Just drive like you would drive a lifted Expedition.They are speed demons and no reason to try and out corner a Ferrari.[not being a SA by far]WHen I had my old one lifted 5",that was on my mind alot more,but I kept in my mind I have to drive a "little" more cautious.
It will raise the center of gravity obviously,but nothing extreme by far.Just drive like you would drive a lifted Expedition.They are speed demons and no reason to try and out corner a Ferrari.[not being a SA by far]WHen I had my old one lifted 5",that was on my mind alot more,but I kept in my mind I have to drive a "little" more cautious.