Repair Shops in MD
#1
Repair Shops in MD
This thread is for repair shops in MD
Please use/post accordingly..................
We will use a 5-star rating system, heres how it will werk
5 stars=Excellent service, 3 stars=dont know, 1 star=stay away from
please list the name, address (at least the street that its on and what its near) the city, county. thanx for your participation. also what u know they do
Please use/post accordingly..................
We will use a 5-star rating system, heres how it will werk
5 stars=Excellent service, 3 stars=dont know, 1 star=stay away from
please list the name, address (at least the street that its on and what its near) the city, county. thanx for your participation. also what u know they do
#2
Shops in MD
Chesapeake Auto in Centreville ,MD
Is there a lower rating than 1?
1) Job took 3 days instead of one
2) Charged $75.00 for shop supplies
3) Left the steering wheel sticky and greasy foot prints on the door sill
4) Charged 40 plus % above retail for the new turbocharger
5) Went back and talked to the owner about above, he said he would look into it and call me. 2 weeks later my phone is not ringing.
Don't let them rip anyone else off
Firewood
Is there a lower rating than 1?
1) Job took 3 days instead of one
2) Charged $75.00 for shop supplies
3) Left the steering wheel sticky and greasy foot prints on the door sill
4) Charged 40 plus % above retail for the new turbocharger
5) Went back and talked to the owner about above, he said he would look into it and call me. 2 weeks later my phone is not ringing.
Don't let them rip anyone else off
Firewood
#4
Midas of Prince Frederick
Corner of 231 and 4 in Calvert County
I rate the whole shop a 5!
They are always there to help me out no mater which vehicle I bring.
89 Ford Mustang GT Drag Car
04 Ford F-250 Harley Davidson
04 Ford F-150 V6
99 Pontiac Grand Am Twin Cam
90 Chevy Lumina 3100
They even help me do custom work as well as suggest custom work.
Corner of 231 and 4 in Calvert County
I rate the whole shop a 5!
They are always there to help me out no mater which vehicle I bring.
89 Ford Mustang GT Drag Car
04 Ford F-250 Harley Davidson
04 Ford F-150 V6
99 Pontiac Grand Am Twin Cam
90 Chevy Lumina 3100
They even help me do custom work as well as suggest custom work.
#5
#7
Trending Topics
#8
Hey everyone, new member obviously... Does anyone know of any shops in the Baltimore/Harford area? I've got a new to me 96 f-250 diesel, that looks nice on the outside, but is turning out to be a major headache everywhere else. (electrical gremlins)
Truck supposedly needed a new transmission and torque convertor - got that done at aamco(which I dont think I will ever go to again) they had the truck 2 weeks and still didnt fix everything trans related. Still need an oil pan gasket - trans oil drips out while running.
They find out that there is a misfire in cylinder 3, which is causing the new transmission to feel exactly like the old one. ( so I wonder if it really needed a new one or they just needed money?)
Sorry for the long first post -
cliffs: does anyone know of a good diesel mechanic in the Baltimore/Harford area?
thanks
Truck supposedly needed a new transmission and torque convertor - got that done at aamco(which I dont think I will ever go to again) they had the truck 2 weeks and still didnt fix everything trans related. Still need an oil pan gasket - trans oil drips out while running.
They find out that there is a misfire in cylinder 3, which is causing the new transmission to feel exactly like the old one. ( so I wonder if it really needed a new one or they just needed money?)
Sorry for the long first post -
cliffs: does anyone know of a good diesel mechanic in the Baltimore/Harford area?
thanks
#11
Gears and Rears
I haven't used this place but I few on another forum were looking for
places that did rear ends and gear work. These people according to what was said have built rears for so PRO trucks including Gravedigger for one and I think it is a small shop.
www.ONETONREARS.com
Dave
places that did rear ends and gear work. These people according to what was said have built rears for so PRO trucks including Gravedigger for one and I think it is a small shop.
www.ONETONREARS.com
Dave
#12
If you HAVE to use a pro shop, I have dealt with two that I trust to do ANY work on my vehicles. I use Rich Morton's Lincoln/Mercury in Pasadena for my Lincoln and Miller Bros FLM in Ellicott City for my diesel. In the (quite a few) times I have HAD to use a pro shop, I have never been anything but very satisfied with their work. Oh yes, Miller Bros DOES have qualified diesel mechs on duty.
#13
#14
I didn't know where else to put this where it would get optimal viewing.
If anyone requires to refer to a maint. manual including electrical schematics, go here:
http://www.bedlib.org/ebsco.html
Click on the "AARC" box and use the word "library" for both the user name AND the password. It has many, many manuals listed.
Don't forget to put it in you "FAVORITES" list so you don't have to keep coming back here to find it!!
If anyone requires to refer to a maint. manual including electrical schematics, go here:
http://www.bedlib.org/ebsco.html
Click on the "AARC" box and use the word "library" for both the user name AND the password. It has many, many manuals listed.
Don't forget to put it in you "FAVORITES" list so you don't have to keep coming back here to find it!!