t-98a slave cylinder ?
#1
02-24-2008, 07:40 PM
t-98a slave cylinder ?
Hey guys. Its the new guy again. I have a question about a slave cylinder. I have a 292 with a t-98a. My question is, is the slave cylinder the same as the the other manuals of the same years. I havnt seen anything specificly for a t-98a. Any info would help out alot, thanks.
#3
02-25-2008, 02:42 AM
Originally Posted by '59 F100
Hey guys. Its the new guy again. I have a question about a slave cylinder. I have a 292 with a t-98a. My question is, is the slave cylinder the same as the the other manuals of the same years. I havnt seen anything specificly for a t-98a. Any info would help out alot, thanks.
Fits: ALL 1957/60 F100/950 / and dozens of other applications 1957/64.
You can buy a repair kit for the slave and clutch master cylinder from NAPA.
Thread
Thread Starter
Forum
Replies
Last Post
duckshepherd
1983 - 2012 Ranger & B-Series
2
03-19-2011 02:01 AM
FayetteCountyCowboy
Clutch, Transmission, Differential, Axle & Transfer Case
1
03-04-2011 04:47 AM
Bullride_101
1983 - 2012 Ranger & B-Series
2
02-03-2009 12:47 PM
strokin'_tatsch
1994.5 - 1997 7.3L Power Stroke Diesel
37
07-03-2008 08:36 PM
