Up for sale or trade is a complete Custom trim package off of my 75 f250. It was attached by the factory rivets. I have the plastic clips and screws also. I looked these over really good this evening when i took the pictures and there are no dents at all, they just need to be polished. I don't plan on two toning the paint and I am not big on having to polish anything on a truck to make it look good so I won't be needing these. I know to buy the package from LMC is about $400. Not sure what there quality is like with the reproduction stuff. I'm not looking for high dollar but I don't plan on giving it away either. I have more pictures if needed.

Make an offer. Some items I'm looking for are the drivers side grill insert, an upper drivers side door hinge or just let me know what you have. Always looking for tools such as timing light, torque wrench and air compressor.

 

I can't seem to PM you about the carb. You can text or call me @ two five three three seven seven five two three five.

 

^ 10 day wait on PM's for new members.

 

3 Motorcraft Oil Filters $10.00 for all

 

Good working Lock set from a 1976 F260. Will also fit 1967 and up other

Ford makes. 2 sets of keys. $25.00. Trades welcome

 

Lock and key from 1976 F26 will fit 67 and up Trucks


$5.00

 

Have three edelbrock carbs for sale. They need to be gone through as they have been sitting a while. $100 each

1405
1406 electric choke
1407 electric choke


Have a pair of series 70 flowmasters. 3" centered in and out $75

 

I have
2002 Ranger wiring diagram workbook. From Ford -$35.00 OBO
It's looking for a new home.


Sean

 

I desperately need an Injection Pump for my 1985 6.9 IDI diesel.

Was moving over the weekend and it went out and caused a lot of headaches.

Will come up with as much cash as I can but would happily trade for other parts or work ect.

 

try pull and save or spaldings here in spokane. then you got to time the pump and bleed the air out.

 

^ I think that's about 4 hours more than one would want to travel. I could be wrong though.

 

1979 F250 rolling chassis. Super Cab/Long bed 2WD, has engine and trans crossmembers for a 460/C6 combination. 4.11 Dana 60 out back.

$150 OBO call, text, email, or PM me. Need it gone

1979 2WD F250 Rolling Chassis


-Jameson

 

I'm looking for a set of mounting bolts for the air pump on a 351W.

I pulled mine off with the intention of running a shorter belt. Then changed my mind and bought an air pump delete pulley. Unfortunately I think I trashed the bolts as they aren't sitting with the pump. Grrrr!

 

Found I can get a refurb injection pump off Ebay for $100, works for me.

I'd have to pass 20+ junkyards to get to SpoCompton, so that's not really an option.

 

Sold all items in this post.