Balancer/pulley bolt

Payner44 · #1 (**permalink**) 02-14-2008, 01:34 PM

Can anyone tell me the size of the bolt that holds the balancer/pulley on to the crank? I believe it's a 9/16, but don't know the length or thread. TIA

312 · #2 (**permalink**) 02-14-2008, 02:24 PM

5/8 fine 1 1/2 long.

Payner44 · #3 (**permalink**) 02-14-2008, 02:40 PM

Quote:

Originally Posted by 312

5/8 fine 1 1/2 long.

I just checked the bolt head and don't have a socket or wrench large enough to know for sure, but it's bigger than 3/4".

Clarification: the pulley and balancer are one piece with a single center bolt holding it on the end of the crank. It's on a 292. Hope this helps identifying what I have.

312 · #4 (**permalink**) 02-15-2008, 07:35 AM

the head is 13/16