Street Glow Brakelight bar; Sidebar and Pro-Strobe kit- new toy install!

[99Trigger3_0]

During the week right before Christmas ('07) I rec'vd my early gift...

Enclosed I had a pair of 57" LED Light Bars (Rocker panel lighting), a 60" Tailgate strip (brake light bar) and a 4-head Pro-Series Strobe kit all from Street Glow LED Truck Accessories.

For Ref goto:
LED Side Bars
LED Light Bar
Strobe Light Kit

The instructions for all are fairly clear if you have some working knowledge of your vehicle's circuitry.

Electrical schematics (or partial) are more helpful on the side (57") LED Light Bars and the Pro-Series Strobe Light Kit. What you're mostly going to look for are the Courtesy light, parking lamps, turn signal and Ign. on electrical schematics.

Street Glow, Inc. also equipped these Led Truck Lights with a good amount of wire that shouldn't leave any DiY'er scratching his or her head over where to find "the" wire or which gauge to use.

Also, Street Glow went as far as giving "suggestions" to help with the install and the long-term use of their products.


Rich

For Ref:
http://streetglow.com/site/led.ledsidebar57.php
http://streetglow.com/site/led.sgletg60.php
http://streetglow.com/site/strobes.proseriesstrobesys.php

[TheWiz427]

They look great Rich! I'm gonna have to get Meanie some strobes.

[99Trigger3_0]

I also forgot to mention that the Side lights are ON because the door is ajar (notice the Interior light on).

Also, the strobe has a built-in wireless module that allows me to control all the flash patterns out of the truck.