I have a Vormax currently filtering my diesel fuel- I bought it a while back when I tried to piece together a home made conversion because of lack of funds. I also tied the two "test" ports on my heads together (cackle cure) with a tee in the middle so I could plumb my wvo in through that with a minumal purge time. Could I purchase a FASS 8A pump, run a return loop, and for heat use my Vormax (take off the diesel line) and put a vegitherm before the tee? And if this works, would the vegitherm be better in the fuel loop, or between the loop and the pump?
__________________ Danny PAA member #12
SoCal Chapter Member
E99 F-350 Dually Van turbo 4x4 CC LB 7.3L, AFE intake, 3 gauge pillar, 4" Magnaflow SS str8-pipe, DP Tuner, Swamps 175/146 SS inj, ARP head and bottom studs, Comp 910 springs, ITP Ovrbst, CCV mod, SS HPX, home made Reg-return, Foil Del, ZooDad, Air Horns 320hp/704tq
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company.