I have an 89 F250 that I want to swap a seat from a 2004 F150 in but I need to make sure it will fit. Im getting the seat from ebay so i measure it.

Can someone please take 5 mins and measure their cabs floor width and length and the same for the seat only I need seat height for how high in the cab it actually sits. I dont want my knees in the dash is what Im getting at. Hopefully i didnt confuse any one. Thansl in advance to those who help.

 

I have a buddy of mine's '04 screw with a bench seat in it. The measurements are as follows:

-seat width - **** to **** is 57 1/2" (lumbar adjustment)
-seat width not counting the ***** is 56" (without manual lumbar adjustment)
-seat depth across the bottom is 28"
-with seat slightly reclined, the overall depth is 34" (about shoulder height to front of seat)
-from the floor mounts to the top of the seat bottom is 11 1/2"

Hope this helps.

 

That does help alot thank you very much.