1997 3.8 Windstar
#1
1997 3.8 Windstar
I have had a problem with code p0174 for a few months it. I changed the cam position sensor , still no change. I found a ignition wire burned so I replace it and also the coil, I had a spare one. The engine light went off most of the summer....it back again the van mostly sputters in traffic or when standing at a stop, sometimes at the first of accerelation. It was interesting that someone suggested that it could be a intake gasket problem. Is there any way to test this. I work in the parts buisness and we sell lots of the plastic intakes for
Fords. Any input would be great!!
Fords. Any input would be great!!
#2
Thread
Thread Starter
Forum
Replies
Last Post
Sid138
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
16
08-25-2012 12:37 AM
charkane
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
12
03-12-2012 07:25 PM
craigl58
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
3
03-19-2006 08:40 PM